Specifications

Appendix B LAN Boot Feature
ReadyBoard 800 Reference Manual 91
PXE-E61: Media test failure, check cable (no cable connection)
PXE-M0F: Exiting Intel Boot Agent
PXE Boot Agent Setup Screen
Intel (R) Boot Agent GE vx.x.xx
Setup Menu
Network Boot Protocol PXE (Preboot eXecution Environment)
Boot Order
Show Setup Prompt
Setup Menu Wait Time
Use BIOS Setup Boot Order
2 seconds
Enabled
<ESC>
Cancel Changes
<Space>
Change Value
<Enter>
Next Option
<F4>
Save Configuration
(Field selection text message)
Figure B-1. PXE Agent Boot Setup Screen
• PXE Boot Agent Setup
♦ Network Boot Protocol – [PXE (Preboot eXecution Environment)]
This is the only option for this field.
♦ Boot Order – [Use BIOS Setup Utility Boot Order]
This is the only option for this field. Selects order in which boot devices are queried.
♦ Show Setup Prompt – [Disabled] or [Enabled]
If [Enabled] is selected, Ctrl + S message will appear during initialization.
♦ Setup Menu Wait Time – [0 seconds], [2 seconds], [3 seconds], or [5 seconds]
NOTE The default values are shown highlighted (bold text) in the list
of options on the this page.
Refer to the bottom of the Setup screen for navigation
instructions when making selections.
Alternate Method of Selecting LAN Boot
The boot process reveals an alternate method of accessing the Network (LAN Boot) if your monitor
powers up quickly enough. You will see a text line similar to the one shown below immediately after
the Press <Del> to enter Setup message displayed on screen.