Specifications

Chapter 4 BIOS Setup Utility
74 Reference Manual ReadyBoard 800
Boot Menu Screen
Main Advanced PCIPnP Boot Security Chipset Power Exit
BIOS Setup Utility
Boot Settings
←→
↑↓
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
V02.xx (C) Copyright 1985-2004, American Megatrends, Inc.
Boot Settings Configuration
Boot Device Priority
Hard Disk Drives
Removable Drives
CD/DVD Drives
Configure Settings
during System Boot.
Figure 4-4. Boot Menu Screen
Boot Settings
The device categories appearing in the Boot screen (Hard Disk Drives, Removable Drives, and CD/DVD
Drives) are dependent on the device types connected to the ReadyBoard 800 assemlby.
>Boot Settings Configuration
Quick Boot – [Disabled] or [Enabled]
If [Disabled] is selected, the BIOS is allowed to perform all POST test, but this slows the
boot process.
If [Enabled] is selected, the BIOS is allowed to skip certain POST tests to boot faster.
Quiet Boot – [Disabled] or [Enabled]
If [Disabled] is selected, the BIOS is allowed to display the POST messages on screen.
If [Enabled] is selected, the BIOS displays the customized splash screen (OEM boot logo) on
screen. The splash screen image (or boot logo) will appear on the display instead of the POST
messages.
For more information about how to customize a splash screen image(OEM boot logo), refer to
the Splash Screen files on the ReadyBoard 800 Doc & SW CD-ROM in the CD-ROM/Software/
Misc/Splash directory for instructions on creating your own logo to display.
AddOn ROM Display Mode – [Force BIOS] or [Keep Current]
If [Force BIOS] is selected, any third party BIOS or add-on ROM messages will be
displayed on screen during the boot process.
If [Keep Current] is selected, no third party BIOS messages will be displayed on screen
during the boot process.