Specifications

Chapter 1 About This Manual
2 Reference Manual ReadyBoard 800
Major Integrated Circuit (IC or Chip) specifications used on the ReadyBoard 800:
• Intel® Corporation and the Pentium® M 745, Pentium M 738, Celeron® M 373, or Celeron M
processors
Web site: http://www.intel.com/design/mobile/datashts/302189.htm
Web site: http://www.intel.com/design/mobile/datashts/303110.htm
Web site: http://www.intel.com (Contact Intel sales for 800 MHz Celeron M)
• Intel Corporation and the chips, 82855GME and 82801DBM, used for the Graphics & Memory
Hub (Northbridge) and I/O Hub (Southbridge) respectively.
Web site: http://www.intel.com/design/chipsets/datashts/25261505.pdf
Web site: http://www.intel.com/design/mobile/datashts/25233701.pdf
• Winbond Electronics, Corp. and the W83627HF chip used for the Super I/O controller
Web site: Web site: http://www.winbond-
usa.com/products/winbond_products/pdfs/PCIC/W83627HF_F_HG_Ga.pdf
• Intel Corporation and the 82551ER, used for the Ethernet 1 controller.
Web site: http://www.intel.com/design/network/datashts/82551ER_ds.htm
• Intel Corporation and the 82541GI, used for the Gigabit Ethernet 2 controller.
Web site: http://www.intel.com/design/network/datashts/82541gi_ei.pdf
NOTE If you are unable to locate the datasheets using the links provided,
go to the manufacturer's web site where you can perform a search
using the chip datasheet number or name listed, including the
extension, (htm for web page, pdf for files name, etc.)
Related Ampro Products
The following items are directly related to successfully using the Ampro product you have just
purchased or plan to purchase. Ampro highly recommends that you purchase and utilize a
ReadyBoard 800 QuickStart Kit to do your project development.
ReadyBoard 800 Support Products
• ReadyBoard 800 QuickStart Kit (QSK)
The QuickStart Kit includes the ReadyBoard 800, DDR SODIMM memory, a cable kit,
documentation, and the ReadyBoard 800 Documentation and Support Software (Doc & SW)
CD-ROM.
• ReadyBoard 800 Documentation and Support Software CD-ROM
The ReadyBoard 800 Documentation and Software (Doc & SW) CD-ROM is provided with the
ReadyBoard 800 QuickStart Kit. The CD-ROM includes all of the ReadyBoard 800
documentation, including this Reference Manual and the ReadyBoard 800 QuickStart Guide in
PDF format, the software utilities, board support packages, and drivers for the unique devices
used with Ampro supported operating systems.