Specifications

ReadyBoard 800 Reference Manual 21
Chapter 3 Hardware
Overview
This chapter discusses the chips and features of the connectors in the following order:
• CPU (U5)
• Memory (J22)
• PCI-104 (J3A, B, C, D)
• IDE Interfaces (J6)
• Compact Flash Socket (J23)
• Floppy/Parallel Interface (J10)
• Serial Interfaces (J11A/B, J15A/B)
• USB (J13A/B, J18A/B)
• Ethernet Interfaces (J16, J17)
• Audio Interface (J4)
• Video Interfaces (J14, J21)
• Miscellaneous
♦ Utility Interfaces (J12)
♦ Reset Switch (J20)
♦ Keyboard/Mouse (J19)
♦ User GPIO signals (J8)
♦ Infrared (IrDA) Port (J9)
♦ System Management Bus (SMBus, J25)
♦ Real Time Clock (RTC)
♦ Oops! Jumper (BIOS Recovery)
♦ Temperature Monitoring
♦ Remote Access (Serial Console)
♦ Watchdog timer
• Power Interfaces (J1, J2, J7)
• Power and Sleep States
NOTE Ampro Computers, Inc. only supports the features/options tested and listed in
this manual. The main integrated circuits (chips) used in the ReadyBoard
800 may provide more features or options than are listed for the ReadyBoard
800, but some of these chip features/options are not supported on the board
and may not function as specified in the chip documentation.