Specifications

Chapter 2 Product Overview
ReadyBoard 800 Reference Manual 7
Board Features
• CPU features
♦ Provides 1.8 GHz Intel Pentium M, 1.4 GHz Low Voltage (LV) Pentium M, 1.0 GHz Ultra
Low Voltage (ULV) Celeron M, or 800 MHz Ultra Low Voltage (ULV) Celeron M
processors
♦ All processors support a Front Side Bus (FSB) of 400 MHz
• Memory
♦ Provides a single standard 200-pin DDR SODIMM socket
♦ Supports a single +2.5V DDR RAM SODIMM up to 1 GB
♦ Supports PC2700 DDR 333 (333 Mbps, 166 MHz)
♦ Provides 512 kB of flash memory
• PCI-104 Bus Interface
♦ Supports PCI 2.3 standard
♦ Supports 33 MHz PCI Bus speed
♦ Supports optional PC/104 standard (add-on MiniModule ISA expansion board)
♦ Supports PC/104 standard at 8 MHz
• IDE Interfaces
♦ Provides two enhanced IDE controllers
♦ Supports two IDE drives on Primary IDE and one compact flash card on Secondary IDE
♦ Supports dual bus master mode
♦ Supports Ultra DMA 33/66/100 modes
♦ Supports ATAPI and DVD peripherals
♦ Supports IDE native and ATA compatibility modes
♦ Compact flash socket (Secondary IDE only)
• Supports IDE compact flash card
• Supports compact flash on secondary IDE bus with Master/Slave jumper
• Supports bootable compact flash card
• Floppy/Parallel Interface
♦ Shared floppy/parallel connector
♦ Supports one floppy disk drive (1 standard 34-pin floppy drive)
♦ Supports all standard PC/AT formats: 360 kB, 1.2 MB, 720 kB, 1.44 MB, 2.88 MB
♦ Supports standard printer port
♦ Supports IEEE standard 1284 protocols of EPP and ECP outputs
♦ Bi-directional data lines
♦ Supports 16 byte FIFO for ECP mode
• Serial Ports
♦ Provides four buffered serial ports with full handshaking
♦ Provides two DB9 connectors Serial 1 & 2 (COM1 & COM2)
♦ Provides two serial ports Serial 3 & 4 (COM3 & COM4) through 20-pin header