Specifications
Chapter 2 Product Overview
16 Reference Manual ReadyBoard 700
Specifications
Physical Specifications
Table 2-9 lists the physical dimensions of the board. Figures 2-7 and 2-8 give the mounting dimensions,
including side views, and Figure 2-7 shows the pin-1 connector locations.
Table 2-9. Weight and Footprint Dimensions
Item Dimension
Weight 0.272kg. (0.60lb)
Height (PC/104-Plus) 15.64mm (0.616”)
Height (Overall) 28.75mm (1.132”)
Width 115mm (4.5”)
Length 165mm (6.5”)
Thickness 1.574mm (0.062”)
NOTE Overall height is measured from the
upper board surface to the highest
permanent component (Serial J5A/B
connectors) on the upper board
surface. This measurement does not
include the heatsinks available for
this board. The heatsink could
increase this dimension.
Power Specifications
Table 2-10 lists the ReadyBoard 700 power requirements.
Table 2-10. Power Supply Requirements
Parameter
400MHz Celeron
Characteristics
650MHz Celeron
Characteristics
933MHz Pentium III
Characteristics
Input Type Regulated DC voltages Regulated DC voltages Regulated DC voltages
In-rush Current* Typical 1.9A (9.5W) Typical 1.8A (9W) Typical 1.94A (9.7W)
BIT** Current Typical 2.11A (10.57W) Typical 2.55A (12.73W) Typical 3.5A (17.5W)
Notes: *In-rush measured with video, 64MB memory, and power connected. **The BIT (burn in test)
is conducted with 64MB SODIMM SDRAM, floppy, USB HDD, CD-ROM, keyboard, mouse, serial
loopbacks, USB CompactFlash card (64MB), two Ethernet channels connected using Win2k OS.
Environmental Specifications
Table 2-11 provides the most efficient operating and storage condition ranges required for this board.
Table 2-11. Environmental Requirements
Processor 400MHz Celeron
Conditions
650MHz Celeron
Conditions
933MHz Pentium
III Conditions
Operating
+0°to+60°C
(32°to+140°F)
+0°to+60°C
(32°to+140°F)
+0°to+60°C
(32°to+140°F)
Temperature
Storage –20°to+75°C
(–4°to+167°F)
–20°to+75°C
(–4°to+167°F)
–20°to+75°C
(–4°to+167°F)
Operating 20% to 80%
relative humidity,
non-condensing
20% to 80%
relative humidity,
non-condensing
20% to 80%
relative humidity,
non-condensing
Humidity
Non-operating 5% to 95%
relative humidity,
non-condensing
5% to 95%
relative humidity,
non-condensing
5% to 95%
relative humidity,
non-condensing