Specifications

Chapter 2 Product Overview
14 Reference Manual ReadyBoard 700
Jumper Definitions
Table 2-5 describes the jumpers shown in Figure 2-6. Refer to the Oops! Jumper to clear the BIOS.
Table 2-5. Jumper Settings
Jumper # Installed Removed
JP1 – TFT/LCD Clock Clock Invert (pins 1-2) Clock Normal (pins 2-3) Default
JP2 – LCD Voltage Type Enable +3.3V (pins 1-2) Default Enable +5V (2-3)
JP3 – CMOS Normal/Clear Normal (pins 1-2) Default Clears Time & Date only (pins 2-3)
JP4 – CF Master/Slave Master (pins 1-2) Default Slave (removed)
JP5 – Flash BIOS Internal (pins 1-2) Default External (removed)
JP6 – COM3 RS485 Termination (pins 1-2) No Termination (removed) Default
JP6 – COM4 RS485 Termination (pins 3-4) No Termination (removed) Default
LED Definitions
Tables 2-6 and 2-7 provide the LED colors and definitions for the Ethernet ports, Port 1 (J10) and Port 2
(J11) located on the ReadyBoard 700. Refer to Figures 2-4 and 2-8.
Table 2-6. Ethernet Port 1 (J10) LED Indicators
Indicator Definition
Ethernet
Link/Activity
LED
Link/Activity LED – This yellow LED is the activity/link indicator
and provides the status of Ethernet port 1 (J10).
• A steady On LED indicates a link is established
• A flashing LED indicates active data transfers
Ethernet
Speed LED
Speed LED – This green LED is the Speed indictor and indicates
transmit or receive speed of Ethernet port 1 (J10).
• A steady Off LED indicates the port is at 10BaseT speed
• A steady On LED indicates the port is at 100BaseT speed
Table 2-7. Ethernet Port 2 (J11) LED Indicators
Indicator Definition
Ethernet
Link/Activity
LED
Link/Activity LED – This yellow LED is the activity/link indicator
and provides the status of Ethernet port 2 (J11).
• A steady On LED indicates a link is established
• A flashing LED indicates active data transfers
Ethernet
Speed LED
Speed LED – This green LED is the Speed indictor and indicates
transmit or receive speed of Ethernet port 2 (J11).
• A steady Off LED indicates the port is at 10BaseT speed
• A steady On LED indicates the port is at 100BaseT speed
Power/IDE LED Definitions
Table 2-8. Power/IDE Activity LED Indicators (D4)
LED# Activity No Activity
LED stack (D4) Steady Green = Power On Steady Off = Power Off
LED stack (D4)
Flashing Yellow = IDE activity
(IDE drive or CompactFlash)
Steady Off = No IDE activity