Specifications

Software Configuration
3–7
3.5 SETUP 3—BIOS FEATURES SETUP
Use SETUP 3 to set a variety of BIOS feature options. Figure 3–3 shows what can be configured on
SETUP 3, and the sections that follow describe each parameter.
BIOS FEATURES SETUP
Ampro Computers, Inc.
Virus Warning : Disabled Video BIOS Shadow : Enabled
CPU Internal Cache : Enabled C8000-CBFFF Shadow : Enabled
External Cache : Disabled CC000-CFFFF Shadow : Disabled
Quick Power On Self Test : Disabled D0000-D3FFF Shadow : Disabled
Boot Sequence : A,C D4000-D7FFF Shadow : Disabled
Swap Floppy Drive : Disabled D8000-DBFFF Shadow : Disabled
Boot Up Floppy Seek : Enabled DC000-DFFFF Shadow : Disabled
Boot Up NumLock Status : Off Onboard UltraSCSI : Disabled
Onboard VGA DIsplay : CRT
PC/104-Plus NMI : Enabled VGA Flat Panel Type : 1
Typematic Rate Setting : Enabled Flat Panel Video : Normal
Typematic Rate (chars/Sec : 30 Serial Console : Disabled
Typematic Delay (Msec) : 250 Serial Boot Loader : Disabled
PCI/VGA Pallette Snoop : Disabled Ethernet Controller : AUI
Watchdog Timer : Disabled I/O Adr: 320h IRQ: 9
Show System Status at Boot : Enabled Node Address: 00405302xxxx
Socket S0 (32-pin DIP) : Disabled
Socket S1 (OEM Flash) : Disabled ESC:Quit ↑ ↓ → ← : Select Item
OS Select For DRAM > 64MB : Non-OS2 F1 :Help PU/PD/+/- : Modify
F5 :Old Values (Shift)F2:Color
F6 :Load BIOS Defaults
F7 :Load Setup Defaults
Figure 3–3 SETUP 3—BIOS Features SETUP
This SETUP screen allows you to configure the following parameters:
 Virus Warning—monitors for writes to the hard disk boot sector. If a write is detected, the BIOS
will display the following warning message, beep the speaker and wait for user confirmation.
!!! WARNING !!!
Disk Boot sector is to be modified
type "Y" to accept, any key to abort
Award Software, Inc.
 CPU Internal Cache—enable or disable the 16K Pentium internal cache.
 External Cache—enable or disable the 256K secondary cache.
 Quick Power On Self Test—when enabled, the POST will skip some tests in order to shorten the
POST time.
 Boot Sequence—determines which drive to search first for the disk operating system.