Specifications

Little Board/P5i Technical Manual
3–4
3.4 SETUP 2—STANDARD CMOS SETUP
Use SETUP 2 to set the date and time, configure your hard and floppy disks, and report system memory.
Figure 3–2 shows what can be configured on SETUP 2, and the sections that follow describe each
parameter.
STANDARD CMOS SETUP
Ampro Computers, Inc.
Date (mm:dd:yyyy) : Wed, Feb 23, 1997
Time (hh:mm:ss) : 8 : 17 : 25
HARD DISK TYPE SIZE CYLS HEAD PRECOMP LANDZ SECTOR MODE
Primary Master : Auto 0 0 0 0 0 0 AUTO
Primary Slave : Auto 0 0 0 0 0 0 AUTO
Secondary Master : Auto 0 0 0 0 0 0 AUTO
Secondary Slave : Auto 0 0 0 0 0 0 AUTO
Drive A : 1.44M, 3.5 in.
Drive B : None Base Memory: 640K
Extended Memory: 7168K
Video : EGA/VGA Other Memory: 384K
Halt On : All Errors
Total Memory: 8192K
ESC : Quit: ↑ ↓ → ← : Select Item PU/PD/+/- : Modify
F1 : Help (Shift)F2 : Change Color
Figure 3–2 SETUP 2—Standard CMOS SETUP
This SETUP screen allows you to configure the following parameters:
• DATE and TIME—requires the numeric entry of mm:dd:yyyy. (Note full 4 digit year.) Day of the
week and calendar month are displayed. Time and date entries take effect as soon as they are entered.
• HARD DISK—set the parameters for the drives connected to the IDE interface. See “IDE Hard Disk
Drives” below for more information.
• FLOPPY DISK—select the type of floppy drive(s) connected to the floppy drive interface. See
“Floppy Drives” below for more information.
• VIDEO—select the initial video mode. See “Video” below for more information.
• HALT ON—select the Power On Self Test (POST) response to errors. See “Error Halt” below for
more information.