Specifications

Little Board/P5i Technical Manual
3–2
Table 3–1 Functions on Each SETUP Page
Page Menu Name Functions
1
Main Menu
Select various SETUP screens
Load or Save BIOS defaults
Configure IDE auto detection
2
Standard CMOS
SETUP
Set date and time
Enter IDE hard disk parameters
Set type and number of floppy disks
Set default video state
Configure BIOS error handling
Displays amount of installed DRAM memory
3
BIOS Features SETUP
Enable/disable virus warning message
Enable/disable internal and external CPU caches
Enable/disable quick POST
Additional floppy parameters
Set NumLock default state
Enable/disable system NMI
Configure keyboard typematic rates
Enable/disable PCI/VGA palette snoop
Enable/disable watchdog timer
Enable/disable system status messages
Configure byte-wide and OEM Flash devices
Enable/disable shadowing of memory areas
Enable/disable UltraSCSI interface
Set onboard VGA controller display mode
Set VGA flat panel type
Enable/disable serial console
Enable/disable boot loader
4
Chipset Features
SETUP
Configure internal controls (not recommended)
Enable/disable/configure IDE interfaces
Enable/disable floppy disk controller
Enable/disable/configure serial ports
Enable/disable/configure parallel port
Enable/disable/configure Ethernet LAN controller
5
Power Management
SETUP
Set power management level
Set power management options
Set power management timers
Select power management events
6
PCI Configuration
SETUP
Set up interrupt mapping
Enable/disable PCI to memory read and write buffers
Enable/disable VGA frame buffer
Enable/disable byte merge for frame buffer
Enable/disable fast back-to-back cycle
Enable/disable PCI write burst
Enable/disable primary frame buffer