Specifications

Little Board/P5i Technical Manual
2–34
Table 2–26 CRT Interface Connector (J5)
Pin Signal Name DB-15
1 Red 1
2 Ground 6
3 Green 2
4 Ground 7
5 Blue 3
6 Ground 8
7 Horizontal
Sync.
13
8 Ground 10
9 Vertical Sync. 14
10 Ground 4, 5, 9,
11, 12, 15
Table 2–27 J5 Mating Connectors
Connector Type Mating Connector
RIBBON 3M 3473-7600
Latching Clip 3505-8010
DISCRETE WIRE MOLEX HOUSING 22-55-2102
PIN 16-02-0103
2.11.2 Connecting a Flat Panel (J3)
Signals for a wide range of flat panel displays, both color and gray scale, appear on connector J3.
Although flat panels of a similar type use similar sets of signals from the video controller, they do not
share a standardized interface connector pin configuration. Note, also, that the names of panel control
signals vary from manufacturer to manufacturer. Read the description of each signal carefully to
determine how each signal is to be used for the display you choose. Refer to the panel manufacturer’s
technical literature to determine how to wire a cable for the panel you choose for your application.