Specifications

Little Board/P5i Technical Manual
2–26
 Solid State Disk (SSD) drive
Table 2–20 shows representative byte-wide memory devices that can be installed in the byte-wide socket.
The table gives examples of generic part numbers, the size of the device (K bytes), and the DIP package
pin count. It also lists the SSD device type, used by the Ampro Solid State Disk (SSD) Support Software
to identify memory devices.
Table 2–20 Typical Byte-wide Devices
SSD Device
Type Size
Package
Pins
Generic
Part Number
EPROMs
EPROM32 32K byte 28 27C256
EPROM64 64K byte 28 27C512
EPROM128 128K byte 32 27C010
EPROM256 256K byte 32 27C020
EPROM512 512K byte 32 27C040
EPROM1024 1024K byte 32 27C080
Flash EPROMs
EPROM128 128K bytes 32 28F010
EPROM256 256K bytes 32 28F020
EPROM512 512K bytes 32 29F040
SRAMs
SRAM32 32K bytes 28 43256
SRAM128 128K bytes 32 62204
SRAM512 512K bytes 32 434000
The pinout of the 32-pin socket can be configured to comply with both the 28-pin and 32-pin JEDEC
standards. You can install a 28-pin device in the 32-pin socket. Install the 28-pin device with pin 1
oriented to the socket’s pin 3, as indicated in Figure 2–7.