Specifications

Introduction
1–9
− Controller: SMC9000-series
− Topology: Ethernet bus, using CSMA/CD
− Media interface options:
− 10BaseT (twisted pair), via an onboard RJ45 connector
− AUI, via an onboard header connector, DB15F (transition cable available from Ampro)
− 10Base2 (thin coax), via external MAU
− Data rate: 10M bits per second
− Data buffer: 4608 byte RAM, accessed via I/O ports
− I/O base address options: 300h, 320h, 360h, or 380h
− Interrupt options: IRQ3, IRQ9 (default), IRQ10, IRQ11
− Boot ROM image can be installed in system using a Flash programming utility (provided)
1.5.4 Support Software
 Ampro Embedded PC-BIOS Features:
− Solid State Disk (SSD) support
− Watchdog timer (WDT) support
− Fast boot options
− Fail-safe boot logic
− Battery-free boot
− Serial console option
− Serial loader option
− EEPROM access functions
− Advanced Power Management (APM) support
− Large hard disk Logical Block Addressing (LBA) support
See the Ampro Embedded-PC BIOS data sheet for additional details about these features.
 Software Utilities included:
− Watchdog timer support
− Serial access and development support
− SCSI support, including ASPI manager
− Display controller support
− Ethernet controller support