Specifications

Index–1
INDEX
10BaseT, 2–42
28-pin devices, in 32-pin sockets, 2–26
AAN-8702, 2–27
AAN-9003, 2–27
AAN-9403, Serial boot, 3–18
Active terminators, SCSI, 2–25
Analog video, 2–33
ANSI X3.131, 2–23
APM, video, 2–36
AUI, 2–41, 3–26
AUI connector (J8), 2–43
Battery, 2–7
Calculating life, 2–7
Battery, external, 2–47
Battery-backed clock, 2–44
Block Diagram, 1–17
Boot PROM, Ethernet, 2–42
Bridge, 3–25
Byte-wide, 1–2
Addressing, 2–27
Configuration, 2–28
Socket signals, 2–31
Sockets, 2–25
Byte-wide Devices, 2–26
Cables
AUI, 2–43
Floppy, 2–18
IDE, 2–19
Modem, 3–16
Parallel port, 2–14
SCSI, 2–23
Twisted-pair, Ethernet, 2–42
Utility, 2–45
Cache, 3–7
CGA40, 3–6
CGA80, 3–6
Clock, 2–44
COM port table, 3–18
Configuration
Summary, 2–4
Configuration, Byte-wide, 2–28
Connector
AUI Ethernet (J8), 2–43
CRT (J5), 2–34
Ethernet RJ45 (J7), 2–42
Floppy (J14), 2–18
IDE (J12), 2–20
Keyboard (J16), 2–47
LCD bias supply (J4), 2–37
Parallel port (J15), 2–15
PC/104 expansion bus (P1, P2), 2–50
Power (J10), 2–6
SCSI (J9), 2–24
Serial ports (J11, J13), 2–12
Utility (J16), 2–46
Connector locations, 2–3
Connector usage summary, 2–2
Contrast, flat panel, 2–38
Cooling, CPU, 2–8
Coprocessor, math, 2–9
CPU, 1–1
CPU, cooling, 2–8
CRT connector (J5), 2–34
CRT video modes, 1–12
CTL-ALT-DEL, 3–1
Cursor commands, 3–17
DC Power, 2–6
DIN plug, keyboard, 2–47
Direction, parallel port, 3–20
Disk, EIDE, 2–18, 3–5
Disk, floppy, 2–17, 3–6
Disk, SCSI, 2–23
DMA, 2–55
DMA, parallel port, 2–14
DOS, 3–16
MODE command, 3–16
DRAM, 2–8, 3–6
DRAM, video requirements, 1–11