Specifications

ReadyBox Users Guide 1
Chapter 1 About This Manual
Purpose of this Manual
This manual is for designers of systems based on the Ampro ReadyBoard™ series of single board
computers (SBCs) and the Ampro ReadyBox™ enclosure. This manual contains information that
permits designers and integrators to create an embedded system based on system level requirements.
Information provided in this user guide manual includes:
• ReadyBox specifications
• Environmental requirements
• ReadyBox connector/pin numbers and definition
• ReadyBox Installation instructions
• ReadyBox assembly and board mounting instructions
• PC/104 Expansion I/O cutouts
Information not provided in this user guide manual includes:
• ReadyBoard information or operation
• BIOS Setup information
Reference Material
The following list of reference materials may be helpful for you to complete your integration design
successfully. Most of this reference material is also available on the Ampro web site in the Embedded
Design Resource Center. The Embedded Design Resource Center was created for embedded system
developers to share Ampro’s knowledge, insight, and expertise gained from years of experience.
Specifications
• EPIC Specification Revision 1.1, July 16, 2004
Web site: http://www.epic-sbc.org/images/pdfs/EPICspec.pdf
• PC/104 Specification Revision 2.5, November 2003
For latest revision of the PC/104 specifications, contact the PC/104 Consortium, at:
Web site: http://www.pc104.org
Reference Manuals and QuickStart Guides
• ReadyBoard 550 Reference Manual and ReadyBoard 550 QuickStart Guide
• ReadyBoard 560 Reference Manual and ReadyBoard 560 QuickStart Guide
• ReadyBoard 700 Reference Manual and ReadyBoard 700 QuickStart Guide
• ReadyBoard 710 Reference Manual and ReadyBoard 710 QuickStart Guide
• ReadyBoard 800 Reference Manual and ReadyBoard 800 QuickStart Guide
Support Information
• ReadyBox product (mechanical) dimensions
Web site: http://www.ampro.com