Specifications

Chapter 4 Hardware Reference
ReadyBox Users Guide 43
Power Switch
The ReadyBox provides a Power switch to control the power state of the ReadyBoard product. The
power switch is a momentary push button switch with a 2-pin cable assembly for attaching to the
ReadyBoard product Utility connector.
NOTE This switch cable must be connected to the correct pins on the Utility
connector to control the power state of the ReadyBoard product.
Table 4-10. Utility Interface Pin/Signal Descriptions
Pin # Signal Description Power Switch connection
1 PS_0n Power On Output Red wire of 2-pin connector
2 GND Ground Black wire of 2-pin connector
3 RST_SW Reset Switch Output Not used
4 +5V +5 Volts Not used
5 SPKR+ Speaker + Output Not used
Notes: The shaded area denotes power or ground.