Specifications

ReadyBox Users Guide 33
Chapter 4 Hardware Reference
Overview
This chapter describes the connectors provided by the ReadyBox that connect to the ReadyBoard while
in the ReadyBox enclosure.
The ReadyBox connectors are listed in the following order:
• IDE hard disk drive (2 ½”) Interface
• Parallel Interface
• Serial Interfaces (Serial 3 and 4)
• USB Connectors (USB 2 and 3)
• Audio Interface (Line In, Line Out, Mic In)
• Power Switch
• Power Interfaces
♦ ATX Power Supply
♦ Power In connector
♦ Power On connector
NOTE Ampro Computers, Inc. only supports the features/options tested and listed
in this manual. Some of the components used in the ReadyBox may
provide more features or options than are listed for the ReadyBox, but
some of these component features/options are not supported in the box and
may not function as specified in the component documentation.
NOTE Refer to the specific ReadyBoard SBC Reference Manual and QuickStart
Guide for more information concerning the connectors and cables not
listed in this chapter.