Specifications

Chapter 3 Installing ReadyBox Options
ReadyBox Users Guide 31
4. Remove the seven screws holding the top cover to the ReadyBox and then slide the cover to the
left as shown in the Figure 3-1.
5. Locate the additional fan in the ReadyBox hardware kit and the four screws included with the fan.
There should be a short two-wire cable connected to the fan assembly with a 2-pin connector on
the end.
6. Place the fan assembly on the inside of the enclosure with the airflow indicator (arrow) pointing
out of the enclosure. See Figure 3-15.
The fan has an arrow embossed on the fan housing indicating the direction of the airflow.
7. Use the four self-tapping screws to secure the fan to the inside of the enclosure. See Figure 3-15.
8. Connect the 2-pin connector to the free 2-pin connector from the ATX power supply adapter.
RdyBox_11a
Self-Tapping M4.5
Flat Head Screws (4)
Fan Power Cable (2-pin)
Air Flow Out
Figure 3-15. Installing the Additional Cooling Fan
Removing the Additional Cooling Fan
To remove the additional cooling fan from the ReadyBox enclosure, simply reverse the installation
procedure and follow all of the safety precautions listed.