Specifications

Chapter 3 Installing ReadyBox Options
ReadyBox Users Guide 29
RdyBox_10a
Removing
Protective
Cover
M3 P0.5 Flat Head
4mm Screws (2)
Figure 3-13. Removing CompactFlash Protective Cover
7. Insert the CompactFlash card into the opening provided by matching the pin-1 orientation of the
CompactFlash card with the arrowhead on the I/O panel. See Figure 3-14.
The CompactFlash card edge and pins are keyed to install into the socket in only one orientation.
Pin-1 one should be down and to the right as shown in the Figure 3-14.
CAUTION To prevent damage to the ReadyBoard and CompactFlash card, do not
force the CompactFlash card into the slot. If you have to force the
CompactFlash card into the slot, it is not installed correctly.
The CompactFlash sockets on the ReadyBoard series have enough
flexibility in the socket to expand when the CF is installed incorrectly.
8. Push the CompactFlash card into the opening until it is firmly into the socket and mates with the
pins. See Figure 3-14.
Pin-1
Indicator
Lip or
Catch Edge
Keyed
Slots (2)
RdyBox_09a
Figure 3-14. Installing the CompactFlash Card