Specifications

Chapter 3 Installing ReadyBox Options
ReadyBox Users Guide 27
Re-Installing the HDD Tray
To reinstall the HDD Tray with the hard disk drive (2 ½”) installed, simply reverse the removal
procedure, ensuring the IDE cable is moved into the tray opening without damage.
CAUTION To prevent damage to the IDE cable ensure it moves freely inside the HDD tray
opening while you re-install the HDD tray.
1. Gently slide the HDD tray into the tray opening and ensure the IDE cable moves freely into the
tray opening. See Figure 3-12.
2. Turn the ReadyBox on its side or back to install the four screws to the HDD tray. See Figure 3-12.
3. Ensure the IDE cable is not twisted or rubbing against any sharp corners inside the enclosure.
You can use cable ties or clamps to secure the IDE cable, so that it is safely out of the way.
4. Replace the top cover by sliding it on and the re-installing the seven screws.
5. Restore power and check the operation of the hard disk drive.
RdyBox_06b
2 ½” Hard Disk Drive Tray
Screws (4)
Re-install the screws (4) to secure
the inside
the ReadyBox.
Hard Disk Drive (HDD) Tray
Figure 3-12. Reinstalling the Hard Disk Drive Tray