Specifications

Chapter 2 Product Overview
ReadyBox Users Guide 13
Mounting Locations, Access Plates, and Covers
Figures 2-8 and 2-9 provide the mounting plate, access plate, and cover locations. The four optional
plastic feet with screws are also shown in Figure 2-8.
Wall or Bechtop
Mounting Plates (2)
(shown as wall mounts)
Wall or Benchtop
Mounting Plates (2)
(shown as benchtop mounts)
1/4 - 20 UNC Screws (4)
1/4 - 20 UNC Screws (4)
Access Plate A
(PC/104 Boards)
Access Plate B
(PC/104 Boards)
M3P0.5 Screws (4)
(Flat Head, 3mm)
M3P0.5 Screws (4)
(6mm, No Washers)
Plastic Feet (4)
RdyBox_04a
Figure 2-8. ReadyBox Mounting and PC/104 I/O Access Plate Locations
NOTE The two access plates (A & B), shown in Figure 2-8 (used for PC/104
input/output connections) are not the same width. See Table 2-8.
Table 2-8. Access Plate Dimensions
Access Plate A Access Plate B
Width
114.53mm (4.509”) 105.62mm (4.158”)
Height
32.51mm (1.28”) 32.51mm (1.28”)