Specifications

Chapter 2 Product Overview
10 Users Guide ReadyBox
Power Specifications
Table 2-5 list the power specifications of the ATX power supply installed in the ReadyBox.
Table 2-5. Power Supply Specifications
Parameter Description
Input Type Auto ranging, 100-240 VAC, +/-10%, @ 50/60 Hz
Output Type Regulated DC voltages
+3.3VDC +/-5% @ 10A Max (Not used by the ReadyBoard)
+5VDC +/-5% @ 14A Max
+12VDC +/-5% @ 4.2A Max (Required for the Enclosure fan, and
used as an option on some ReadyBoards)
-12VDC +/-10% @ 0.3A Max (Not used by the ReadyBoard)
+5VDC Standby +/-5% @ 2A Max
Output Power MAX 150W (Output of +3.3V and +5V not to exceed 85W)
Cooling Fan Requirements
The ReadyBox only requires an additional cooling fan installed in the enclosure for specific
ReadyBoard SBCs. Only the ReadyBoard SBCs listed in Table 2-6 require an additional fan
installed in the enclosure. Refer to Chapter 3, Installing ReadyBox Options for more information and
installation instructions.
Table 2-6. Additional Cooling Fan Required
Model CPU Types Requiring Enclosure Fan
ReadyBoard 550 VIA Eden ESP 10000
ReadyBoard 560 VIA Eden ESP 10000
ReadyBoard 700 Intel Celeron, 650MHz LV Intel Pentium III, 933MHz LV
ReadyBoard 710 Intel Celeron, 650MHz LV
ReadyBoard 800 Intel Pentium M, 1.1GHz LV Intel Pentium M, 1.4GHz LV
Physical Specifications
Table 2-7 gives the physical dimensions of the ReadyBox as shown in Figures 2-4 and 2-5, and the
mounting dimensions in Figures 2-6 and 2-7.
Table 2-7. Weight and Footprint Dimensions
Parameters Measurements
(Enclosure Only)
Additional Measurements
Weight
2.95kg (6.5lb)
Height
115mm (4.52”) 123mm (4.84”) with plastic feet
Width
280mm (11.02”) 319.8mm (12.59”) with mounting brackets
Depth
180mm (7.08”) 195.50mm (7.69”) HDD Tray handle