User`s manual

Board Interfaces 47
cPCI-6965
Clear CMOS Switch (SW9)
The cPCI-6965 series comes with a Clear CMOS switch to
reset the CMOS values to default. Press the Switch SW9
located near the J1 connector to clear the CMOS.
PMC V(I/O) Select Jumper (JPX1)
JPX1 is a three pin jumper for +3.3V or 5V PMC VIO signaling
selection.
Table 4-20: PMC V(I/O) Select Jumper Settings
Status JPX1
5V
3.3V (Default)
NOTE:
NOTE:
Pin 1 of JPX1 is indicated by the thicker line printed on the
PCB.