User`s manual

DIGITAL-LOGIC AG MSLB-P5 Manual V0.3
PRELIMINARY 184
Continued
AL = 0Bh Get PM Event
Exit:
BX PM event code
AL = 0Ch Get Power State
Entry:
BX Power Device ID:
0001h = All PM devices managed by the BIOS
01XXh = Display
02XXh = Secondary Storage
03XXh = Parallel Ports
04XXh = Serial Ports
05XXh = Network Adapters
06XXh = PCMCIA Sockets
E000h-EFFFh = OEM-defined power-device IDs
All other values reserved
where:
XXh = Unit Number (0 based)
AH = 53h APM 1.1 BIOS Services
AL = 0Dh Enable/Disable power management (APM 1.1 only)
Entry:
BX Power Device ID:
0001h = All PM devices managed by the BIOS
01XXh = Display
02XXh = Secondary Storage
03XXh = Parallel Ports
04XXh = Serial Ports
05XXh = Network Adapters
06XXh = PCMCIA Sockets
E000h-EFFFh = OEM-defined power-device IDs
All other values reserved
where:
XXh = Unit Number (0 based)
AL = 0Eh APM Driver Version
(APM 1.1 only)
Entry:
BX 0000h = BIOS device
CH APM Driver major version number (BCD)
CL APM Driver minor version number (BCD)
Exit:
AH APM Connection major version number (BCD)
AL APM Connection minor version number (BCD)
AL = 0Fh Engage/disengage power management
(APM 1.1 only)
Entry:
BX Power Device ID:
0001h = All PM devices managed by the BIOS
01XXh = Display
02XXh = Secondary Storage
03XXh = Parallel Ports
04XXh = Serial Ports
05XXh = Network Adapters
06XXh = PCMCIA Sockets
E000h-EFFFh = OEM-defined power-device
IDs
All other values reserved
where:
XXh = Unit Number (0 based)
Unit Number FFh = all devices in this class
CX Function code:
0000h = Disengage power management
0100h = Engage power managment