User`s manual

ManualsBrandsAmpro Corporation ManualsComputer equipmentLittle Board P6d

151

152

153

154

155

156

157

158

159

160

DIGITAL-LOGIC AG MSLB-P5 Manual V0.3

PRELIMINARY 153

NOTE: There is not always an exact correspondence between the order specified in these menus and

the letters assigned by the operating system. Many devices such as Legacy Option ROMs sup-

port more than one device, which can be assigned more than one letter.

PhoenixBIOS 4.0 supports up to six floppy devices, to which the operating system may assign,

for example, drive letters A;, B:, E:, F:, G:, and H:.

If you want the CD ROM Drive to have a letter coming before the Hard Drive, move it in front of the

Hard Drive. MultiBoot attempts to boot only from the first item in this list and ignores the rest.

Item Specific Help

F1 Help

ESC Exit

Select Item

Select Menu

-/+ Change Values

To select the boot device

use the Up and Down

2. [Legacy Option ROM]

[Primary Master]

arrows then press <+> to

move the device up the

list, or <-> to move it

down the list. Press

<Esc> to exit this menu

Boot

Fixed Media

3. [Network]

Selecting Removable Media brings up a similar menu for selecting the boot order of removable media

devices if you have more than one.

14.7.4 The Boot First Menu

Display the Boot First Menu by pressing <Esc> during POST. In response, the BIOS first displays the

message, "Entering Boot Menu ..." and then displays the Boot Menu at the end of POST. Use the

menu to select any of these options:

1. Override the existing boot sequence (for this boot only) by selecting another boot de-

vice. If the specified device does not load the operating system, the BIOS reverts to the

previous boot sequence.

2. Enter Setup.

3. Press <Esc> to continue with the existing boot sequence.

Select boot device or Setup.

3. Diskette Drive

2. ATAPI CD-ROM Drive

Hard Drive

Boot Menu

Use the Up and Down arrows,

then <Enter> or press <Esc>

to exit.

4. Removable Devices

5. Network Boot

If there is more than one bootable hard drive, the first one in the Boot Connection Device Menu is the

one represented here.