User`s manual

DIGITAL-LOGIC AG MSLB-P5 Manual V0.3
PRELIMINARY 152
PhoenixBIOS 4.0 Setup - Copyright 1992-1997 Phoenix Technologies Ltd.
Main Advanced
Item Specific Help
F1 Help
ESC Exit
Select Item
Select Menu
-/+ Change Values
Removable Media
Fixed Media
ExitBoot
2. [Hard Drive]
1. [Diskette Drive]
3. [ATAPI CD-ROM Drive]
4. [Removable Devices]
5. [Network Boot]
Removable Format
To select the boot device
use the Up and Down
arrows then press <+> to
move the device up the
list, or <-> to move it
down the list. Press
<Esc> to exit this menu
P
P
P
If you have more than one bootable hard drive, select Fixed Media and press <Enter> to display the
Fixed Disk menu and choose which drive is represented in the boot-order list.
If you have more than one Removable Media drive, select Removable Media and press <Enter> to
display the Removable Media menu and choose which drive is represented in the boot-order list.
Select Removable Format to display the Removable Format menu for determining whether the re-
movable media is formatted as removable or fixed disk.
14.7.2 Removable Format Menu
Selecting Removable Format brings up a menu like this:
PhoenixBIOS 4.0 Setup - Copyright 1992-1997 Phoenix Technologies Ltd.
Item Specific Help
F1 Help
ESC Exit
Select Item
Select Menu
-/+ Change Values
To select the device
use the Up and Down
[Removable]
LS-120 COSM 01
arrows then press <Enter>
to change the format to
match the format you are
using. Press <Esc> to
exit this menu
Boot
Removable Format
IOMEGA ZIP 100 ATAPI
[Fixed]
Use this menu to specify whether your removable media is formatted like a hard disk or floppy.
14.7.3 Fixed and Removable Media Menus
Selecting Fixed Media or Removable Media brings up a menu like the one shown below for deter-
mining which item is represented on the order list specified in the Setup Menu described above and
displayed in Boot First Menu shown below. “Bootable ISA Cards” refers to devices, such as Legacy
(non-PnP) SCSI or network cards, from which you can boot the operating system.
Use these menu to select the order in which POST installs the devices and the operating system as-
signs device letters:
A:, B:, etc. to floppy drives
C:, D: and E:, etc. to the hard-disk drives