User`s manual

DIGITAL-LOGIC AG MSLB-P5 Manual V0.3
PRELIMINARY 14
Physical Characteristics:
Dimensions: Length: 204 mm
Depth: 140 mm
Height: 40 mm
Weight: 300gr
PCB Thickness: 1.6 mm / 0.0625 inches nominal
PCB Layer: 10 with separate ground and VCC plane for low noise
Operating Environment:
Relative humidity: 5 - 90% non condensing
Vibration: 5 to 2000 Hz
Shock: 10 G
Temperature:
Operating: Standard version: -25°C to +70°C
Enhanced temp. range: -40°C to +85°C -E48
Storage: -55°C to +85°C
Cooling:
Standard: 5V Fan, with feedback (frequency sensor)
Temperaturesensor: onboard, located in the center below the CPU
Option: passive with air flow > 1000ft/Min.
EMI / EMC (IEC1131-2 refer MIL 461/462):
ESD Electro Static Discharge: IEC 801-2, EN55101-2, VDE 0843/0847 Part 2
metallic protection needed, separate Ground Layer
included,15kV single peak
REF Radiated Electromagnetic Field: IEC 801-3, VDE 0843 Part 3, IEC770 6.2.9.
not tested
EFT Electric Fast Transient (Burst): IEC 801-4, EN50082-1, VDE 0843 Part 4
250V - 4kV, 50 ohms, Ts=5ns
Grade 2: 1KV Supply, 500 I/O, 5Khz
SIR Surge Immunity Requirements: IEC 801-5, IEEE587, VDE 0843 Part 5
Supply: 2 kV, 6 pulse/minute
I/O: 500 V, 2 pulse/minute
High-Frequency Radiation: EN55022
Compatibility:
MSLB: mechanically compatible to standard EBX single boards
Any information is subject to change without notice.