User`s manual

DIGITAL-LOGIC AG MSLB-P5 Manual V0.3
PRELIMINARY 124
10 SOUNDPORT DRIVER INSTALLATION
10.1 ESS1869
To download the latest drivers at http://www.digitallogic.ch
10.2 Driver for WIN 3.11
Insert the DRIVER DISK FOR WIN3.1, after starting windows V3.1. Run „SETUP.EXE“ on the driver
floppydisk A:. Choose „INSTALL“ for all the files to be loaded and system files to be modified. The
setup utility allows a different directory to be choosen other than default „ C:\ADISOUND“ for copying.
Select „CONTINUE“ to begin copying the files from the disk. After the setup has completed type
„EXIT“, restart Windows. You may configure the device before restarting Windows by choosing
„CONFIG“. This „ESS1869 I/O Configuration“ allows the user to configure the device to something
other than default.
After exiting setup, other configuration changes must be made using the program item drivers under
ESS1869 Control Panel !
In the Control Panel for the ESS1869 the following setting may be made:
Windows Sound System:
Base Port: Address 800 - 807h
IRQ IRQ5
DMA Play DMA 01
DMA Rec. DMA 00
MPU401:
Base Port: Address 330-331h
IRQ: IRQ5
Sound Blaster System:
Base Port: 220-22fh
Others:
OPL3 Port: 388h-38Bh
Game Port: 201h-201h (not free on MSM-P5!)
After exiting setup and restarting Windows V3.1 the drivers will be loaded. If there is an I/O, DMA or
IRQ conflict between the audio drivers and other devices in the system, use the Willow Pond Universal
SoundComm Driver setup to change any setting, it is located in „drivers“ under Control Panel. The
MPU-401 I/O address and IRQ settings are located in the Roland MPU-401 driver.