User`s manual

DIGITAL-LOGIC AG MSLB-P5 Manual V0.3
PRELIMINARY 12
Video Input: (option)
Controller: 69000 from C&T
BUS: 32 Bit highspeed 33 MHz PCI bus
Videoinput Norm: 3 channels with PAL or NTSC (composite video sources = CVBS)
2 channels YC sources (=SVHS)
2 channels CVBS and 1 channel SVHS
this configuration may be programmed into the SAA7111
Driversupport: WIN95, under development for NT4.0
Resolution: 720 x 512
Capture speed: up to 30 images/second
PAL/NTSC Decoder: Phillips SAA7111
Y-C resolution: 4:4:4 or 4:2:2 or 4:1:1
RGB resolution: 4:4:4 (16 Bit), gamma corrected
Mass Storage:
FD: Floppy disk interface, for max. 2 floppies, 34pin connector
HD: primary IDE 44pin interface for 2 drives (master & slave)
secondary IDE 44pin interface for 2 drives (master & slave)
SCSI Devices: PCI 10MB/s FAST SCSI-2 up to 7 devices, removable boot media
AIC-7860 PCI SCSI controller
Standard AT interfaces:
Serial: Name FIFO IRQs Addr. Stan-
dard
Option
COM1 yes IRQ4 3F8 RS232C
COM2 yes IRQ3 2F8 RS232C
COM3 yes IRQ4/11 3E8
RS232C
RS485/RS422
COM4 yes IRQ3/10 2E8
RS232C
RS485/RS422
(Baudrates: up to 115kBaud)
Parallel: LPT1 printer interface, in the EPP Mode bidirectional
Keyboard: PS/2
Mouse: PS/2
Speaker: 0.1W output drive
RTC: 146818A compatible RTC with CMOS-RAM 128Byte
Backup current:
0.2µA
Battery: Lithium 3V, Lifetime up to 10 years at 25°C
LAN - Ethernet: (option)
Type: IEEE 802.3
Controller: INTEL 82559
Compatibility: ODI-Novell
Driver: ODI, packet-driver IEEE 802.3, NT3.5, OS/2, NDIS, NT4.0
Connector: RJ-45 for 100/10Base-T
Data Rate: 100 or 10 MB/sec
Data-Bus: 32 Bit PCI
Cable Type:
Remote Boot Socket: none
RAM Buffer: 4k
Configuration: with EEPROM