User`s manual

DIGITAL-LOGIC AG MSLB-P5 Manual V0.3
PRELIMINARY 116
6.2 The Harddisk Cable 40 pins
IDT terminal for dual row 0.1" (2.54 mm grid) and 1.27 mm flat cable. 40 pins signal, power is sepa-
rately wired. Refer to the technical manual of the harddisk used.
1 2
39 40
1 2
39 40
Max. length for IDE cable is 30 cm.
ATTENTION:
A maximum of two IDE drives can be connected to the HD-Interfaces. The first drive must always be
the MASTER drive (= C:) and the second is the SLAVE drive. Check the selection of the drive in the
technical manual. An inverse connection could destroy the drive or the MICROSPACE PCC-P5. Be
very careful. There is no warranty in this case.