User`s manual

DIGITAL-LOGIC AG MSLB-P5 Manual V0.3
PRELIMINARY 115
6 CABLE INTERFACE
6.1 The Floppy Disk Cable
IDT Terminal for Dual Row 0.1" (2.54 mm grid) and 1.27 mm flat cable
1 2
33 34
1 2 1 2
MicroSpace DRIVE B: DRIVE A:
10 10
16 16
Floppydisk Cable 34pin
max. cable length = 400mm
For drive A: the lines 10 to 16 are crossed (180 degrees).
All floppy drives must be selected as drive number 2, because the cable assigns the drive letter A: or
B: to the drives. The power must be connected separately. Refer to the technical manual of the floppy
drives used.
The last drive must be terminated with 1 Kohms. Do not use 150 ohms terminated floppy drives!