User`s manual

DIGITAL-LOGIC AG MSLB-P5 Manual V0.3
PRELIMINARY 100
5 DESCRIPTION OF THE CONNECTORS
Flat cable
44pin IDE is: IDT Terminal for Dual Row (2.00mm grid) and 1.00mm flat cable
All others are: IDT Terminal for Dual Row 0.1" (2.54mm grid) and 1.27mm flat cable
X29 Power Supply connector
Pin Signal
Pin 1 VCC Logic, CPU
Pin 2 Ground
Pin 3 Ground
Pin 4 +12V Input for LCD’s
X14/X17 = COM1 serial port connector RS-232C
X15 = COM2 serial port connector RS-232C
Channel: Header onboard D-SUB connector Signal
COM 1: Pin 1 Pin 1 = DCD
X14/
X17
Pin 2 Pin 6 = DSR
Pin 3 Pin 2 = RxD
Pin 4 Pin 7 = RTS
Pin 5 Pin 3 = TxD
Pin 6 Pin 8 = CTS
Pin 7 Pin 4 = DTR
Pin 8 Pin 9 = RI
Pin 9 Pin 5 = GND
Pin 10 - = +5V
COM 2: Pin 1 Pin 1 = DCD
X15 Pin 2 Pin 6 = DSR
Pin 3 Pin 2 = RxD
Pin 4 Pin 7 = RTS
Pin 5 Pin 3 = TxD
Pin 6 Pin 8 = CTS
Pin 7 Pin 4 = DTR
Pin 8 Pin 9 = RI
Pin 9 Pin 5 = GND
Pin 10 - = +5V