Specifications

Chapter 4 BIOS Setup
50 Reference Manual CoreModule 420
User Interface Options
• Keyboard and Mouse
♦ Numlock – [Disabled] or [Enabled]
♦ Typematic – [Disabled] or [Enabled]
These fields are used to set parameters for the keyboard.
• Delay – [250ms], [500ms], [750ms], or [1000ms]
This field determines how many milliseconds the keyboard controller waits before stating
to repeat a key, if the key is held down on the keyboard.
• Rate – [30cps], [24cps], [20cps], [15cps], [12cps], [10cps], [8cps], or [6cps]
This field determines the rate, in characters per second, the keyboard controller will repeat
a key, if the key is held down on the keyboard.
♦ Initialize PS/2 Mouse – [Disabled] or [Enabled]
• User Interface
♦ Show ‘Hit <Del>…’ – [Disabled] or [Enabled]
∗ If this feature is [Enabled], it will place ‘Hit <Del>…’ on screen during the boot process,
to indicate when you may select <Del> to enter the BIOS Setup menus.
♦ F1 Error Wait – [Disabled] or [Enabled]
∗ If this feature is [Enabled], it will display an Error message indicating when an error has
occurred and waits for you to respond by hitting the F1 key.
♦ Config Box – [Disabled] or [Enabled]
∗ If this feature is [Enabled,] it displays the Configuration Summary Box, which list all of
the configuration information for the system, at the completion of POST, but before the
OS (Operating System) is loaded.
♦ Splash Screen – [Disabled] or [Enabled]
∗ If this feature is [Enabled] a Splash Screen is displayed as a default or customized splash
screen. Refer to the Splash Screen Customization topic later in this chapter for
instructions on how to customize the splash screen.
Memory Control Options
• Memory
♦ Memory Test – [Fast], [Standard], or [Exhaustive]
♦ Memory Hole – [Disabled], [1MB], [2MB], [4MB] or [8MB]
♦ Flash Address – [Disabled], [8MB], [9MB], [10MB], [11MB], [12MB], [13MB], [14MB] or
[15MB]
♦ Shadow C800-CBFF – [Disabled] or [Enabled]
♦ Shadow CC00-CFFF – [Disabled] or [Enabled]
♦ Shadow D000-D3FF – [Disabled] or [Enabled]
♦ Shadow D400-D7FF – [Disabled] or [Enabled]
♦ Shadow D800-DBFF – [Disabled] or [Enabled]
♦ Shadow DC00-DFFF – [Disabled] or [Enabled]