Specifications

Chapter 3 Hardware
40 Reference Manual CoreModule 420
Pin # Signal Description
38
VSYNC Vertical Sync – This signal is used for the digital vertical sync output to the
CRT. Also used (with HSYNC) to signal power management state information
to the CRT per the VESA™ DPMS™ standard.
39
AGNDR Analog Ground for Red
40
RED Red – This pin provides the Red analog output to the CRT.
41
AGNDG Analog Ground for Green
42
GREEN Green – This pin provides the Green analog output to the CRT.
43
AGNDB Analog Ground for Blue
44
BLUE Blue – This pin provides the Blue analog output to the CRT.
Notes: The shaded area denotes power or ground. The signals marked with * indicate active low.