Service manual

MDS E-SCAN MONITOR LOG SELECTION

5.3 Log Selection

The logs menu contains four

menu options:

1. ERR/WARN LOG

This option allows the operator to

view a log containing a history of

system errors and warnings. Each

log entry contains the

error/warning message along with

a time and date stamp.

2. PURGE LOG

This option allows the operator to

view a log containing a purge

history. This log will enable the

operator to see how many

seconds of steam cleaning were required to successfully clean the MPR E-Scan prisms during

each purge cycle.

3. DIVERT LOG

This option allows the operator to view a log containing a history of divert conditions. These log

entries reveal not only the time and date of the divert, but also the reason the divert occurred.

This will enable the operator to determine if the cause of the divert was instrument failure, a

remote device or a low solids reading.

4. COMPARATOR LOG

This option allows the operator to view a log containing a history of comparator solids readings.

This log keeps track of differences between the MPR E-Scan readings and enables the operator

to determine the magnitude of difference, which may be useful for troubleshooting purposes.

5. CLEAR LOGS

This option allows the operator to clear all of the logs.

Log Mode Screen