Service manual

MDS E-SCAN MONITOR OPERATION

Note: The readings below are just an example, they will vary from application to application.

5.2 Normal Mode

5.2.1 What Normal Mode Does

The Normal Mode of operation consists of the following information:

• System time, date and software version number.

• Current solids readings from the MPR E-Scan units.

• Current time until next purge for the MPR E-Scan units.

• System status for the MPR E-Scan units.

• System status for the Monitor.

5.2.2 Monitor MPR E-Scan Status Boxes in Normal Mode

P/SUPPLY:

This status field monitors the MPR E-Scan unit +15, -15, and +5 volt power supply lines.

The following errors can be displayed in this status field: