Service manual

MDS E-SCAN MPR E-SCAN OPERATION
14
2.1.2 Button Touch Pad Function Chart
Scrolls cursor horizontally to the left and also used to initiate editing of
calibration voltages in the calibration table, and temperature values in the
compensation table.
Scrolls cursor horizontally to the right and also used to initiate editing of
all system parameters excluding those accessed by the LEFT ARROW.
Scrolls cursor vertically in the “Up” direction.
Scrolls cursor vertically in the “Down” direction.
ENTER Used to select all cursor items and to save edited data.
Esc Used to abort to previous operation without saving edited data.
Menu Used to immediately display the normal mode of operation without saving
information or main menu selections if already in normal mode.
PgUp Displays previous screen of information or mode of operation, and is
applicable when indicated on the screen.
PgDn Displays next screen of information or mode of operation, and is
applicable when indicated on the screen.
+/
_
Allows data fields to be either positive or negative. Also used to create
calibration table end, to toggle diagnostic options, and to record sample
readings used for Analog Zero adjustment.
0 – 9 Numeric characters used to input data.