Full Product Manual

15
AmpliFi User Guide Chapter 2: Overview
Address
The range of available IP addresses is displayed. The DHCP
server assigns IP addresses from the pool (or group) of IP
addresses.
DHCP Settings
• Range The current range is displayed. Select the range
you want to use.
• Subnet The current subnet is displayed. Select the subnet
you want to use.
• Start The current starting IP address of the range is
displayed. Select the starting IP address you want to use.
• End The current ending IP address of the range is
displayed. Select the ending IP address you want to use.
• Lease Validity The IP addresses assigned by the DHCP
server are valid only for the duration specified by the lease
time. Increasing the time ensures client operation without
interruption, but could introduce potential conflicts.
Decreasing the lease time avoids potential address
conflicts, but could lead to minor interruptions for the
client while it acquires a new IP address from the DHCP
server. Select the appropriate option: 1 hour, 2 hours,
4hours, 8 hours, 12 hours, 1 day, 1 week, or 1 month
(30 days), or 1 year (365days).
Tap to save your changes.
• Static Leases Select this option to display a list of static IP
addresses assigned to specific devices.
Port Forwarding Tap this option to create a virtual port
that allows you to forward traffic from one port to another.
Information
About Tap this option to display router information, version
numbers, and MAC addresses for each of the hardware
interfaces.
Firmware Update Tap this option to check for firmware
updates for your AmpliFi devices.
General
The General screen allows you to access device settings. Tap
to save your changes.
2.4 GHz
- Automatic Enabled by default. Disable this option to
specify a channel setting.
- Channel Select the appropriate channel to use.
- Bandwidth Select the appropriate channel width,
20MHz or 20/40 MHz.
5 GHz
- Automatic Enabled by default. Disable this option to
specify a channel setting.
- Channel Select the appropriate channel to use.
- Bandwidth Select the appropriate channel width,
20MHz, 40MHz, or 80 MHz.
Tap to save your changes.
To map a static IP address to a specific MAC address, tap +.
- Name Enter a descriptive name for the device that will
be assigned a static IP address.
- MAC Address Enter the MAC address of the device.
- IP Address Select the IP address you want to assign.
Tap to save your changes.