Quick Start Guide

Router Reset
MeshPoint Reset
If the AmpliFi Router administration password is lost, factory default settings can be
restored.
Use an object such as a straightened paper clip to press Reset located on the
bottom of the AmpliFi Router for approximately 10 seconds until the LED turns off.
If the AmpliFi Router is reset, all MeshPoints should also be reset using the same
method.
System Specifications
Max. TX Power 26 dBm
Radios 6
MIMO Chains 18
Speed 5.25 Gbps
Range 20,000 sq. ft
ESD/EMP Protection ± 24kV Air/Contact
Buttons Reset
Antennas (3) Dual-Band Antennas
AFi-G Quick Start Guide