AFi-G Quick Start Guide Package Contents AmpliFi Router AmpliFi MeshPoints (Qty.
AFi-G Quick Start Guide Touchscreen Display The front of the AmpliFi Router features an adjustable, full-color touchscreen display. Adjustable LED The bottom of the AmpliFi Router features an adjustable LED that is fully lit by default when the Router is configured and ready for use. The brightness settings of the touchscreen and LED are configurable using the AmpliFi app. Ethernet Ports Four Gigabit Ethernet ports available to connect 10/100/1000 Mbps wired network devices to the internet.
WAN Port AFi-G Quick Start Guide Connects to the broadband modem provided by your ISP (Internet Service Provider). Power Port The Power Adapter connects to this port. USB Port Reserved for future use. MeshPoint Adjustable Antenna The MeshPoint antenna can be adjusted to provide optimal signal coverage for your location.
the Router. AFi-G Quick Start Guide Installation The AmpliFi Router can be installed using one of the following methods: App Users AmpliFi app for iPhone or Android™ Non-App Users Connect to default AmpliFi wireless network (SSID) from a computer or tablet. App Users 1. 2.
AFi-G Quick Start Guide 3. 4.
AFi-G Quick Start Guide 5. 6.
AFi-G Quick Start Guide 7. 8. Follow the on-screen instructions to configure your AmpliFi Router.
AFi-G Quick Start Guide Non-App Users 1.
2. 3. 4.
AFi-G Quick Start Guide 5. 6.
AFi-G Quick Start Guide 7. 8.
AFi-G Quick Start Guide 9. Connect to the new wireless network that you've created.
AFi-G Quick Start Guide Best Performance Mesh Multi-Hop 1.
AFi-G Quick Start Guide 2. App Features The system dashboard provides an overview of the AmpliFi Wi-Fi system including network status, number of connected clients, and active download/upload speeds. Tap devices to display/edit settings.
Quick Start screen Guide to run a speed test that will Tap Start Test onAFi-G the Performance provide your download speed, upload speed, and connection ping time. Swipe left on the throughput section to view additional data. A history of recent tests is displayed at the bottom. To provide guest access, determine the number of guests, select a time limit for their access, and tap Start. Guests simply connect to your wireless network named with the -guest label. No password is required.
If the AmpliFi Router administration is lost, factory default settings can be AFi-Gpassword Quick Start Guide restored. Router Reset Use an object such as a straightened paper clip to press Reset located on the bottom of the AmpliFi Router for approximately 10 seconds until the LED turns off. MeshPoint Reset If the AmpliFi Router is reset, all MeshPoints should also be reset using the same method. System Specifications Max. TX Power Radios MIMO Chains 26 dBm 6 18 Speed 5.25 Gbps Range 20,000 sq.
Display 1.6" (40.6 mm) Diagonal, 240 x 240, 212 ppi, G+F Touch, Full Color AFi-G Quick Start Guide Wi-Fi Standard 802.11ac Power Save Supported Wireless Security WPA2-PSK AES/TKIP Operating Temperature 14 to 131° F (-10 to 55° C) Operating Humidity 5 to 95% Noncondensing Certifications FCC / CE / IC Supported Data Rates 802.11ac 13 Mbps to 1300 Mbps (MCS0 - MCS9, VHT 20/40/80) 802.11n 6.5 Mbps to 450 Mbps (MCS0 - MCS23, HT 20/40) 802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.
ui.com/support/warranty AFi-G Quick Start Guide The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and, where applicable, specify arbitration instead of jury trials or class actions. Compliance FCC Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. 1.
AFi-G Quick Start Guide CAN ICES-3(B)/NMB-3(B) Le présent appareil est conforme aux CNR d’ISDE Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1. l’appareil ne doit pas produire de brouillage; 2. l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
AFi-G Quick Start Guide Country List AT BE BG CY CZ DE DK EE EL ES FI FR HR HU IE IT LV LT LU MT NL PL PT RO SE SI SK UK BFWA (Broadband Fixed Wireless Access) members noted in blue Note: This device meets Max. TX power limit per ETSI regulations. The following apply to products that operate in the 5 GHz frequency range: Note: This device is restricted to indoor use only when operating in the 5150 - 5350 MHz frequency range within all member states.
AFi-G Quick Start Guide © 2016-2020 Ubiquiti Inc. All rights reserved.
