Instruction manual

AMPDIO DRIVERS
Page 64
The blocks marked ‘2 DACs’ consist of a pair of D-to-A converters. The blocks marked ‘DAC’
consist of a single D-to-A converter. The blocks marked ‘ADC’ consist of a multiplexed A-to-D
converter.
The version 4.10 (and above) driver also supports the following PCI card types:
ADDRESS
OFFSET
IO
Block
PCI230 PCI260
00
16
– 03
16
0 (X1) PPI
04
16
– 07
16
1 (X2)
08
16
– 0B
16
2 (Y1) ADC ADC
0C
16
– 0F
16
3 (Y2)
10
16
– 13
16
4 (Z1)
14
16
– 17
16
5 (Z2) CT CT
18
16
– 1D
16
6 CT
Connect
CT
Connect
1E
16
7 IE IE
1F
16
Unused Unused
The blocks marked ‘ADC’ on these PCI cards are just placeholders for the interrupt source. The
actual registers are not mapped into this area. The PCI230 also has two DAC channels, but the
registers are not mapped into this area. See the PCI230/PCI260 manual for full details of the
registers.
The version 4.20 (and above) driver also supports the following PCI card types:
ADDRESS
OFFSET
IO
Block
PCI224 PCI234
00
16
– 03
16
0 (X1) EXT EXT
04
16
– 07
16
1 (X2)
08
16
– 0B
16
2 (Y1) DACS DACS
0C
16
– 0F
16
3 (Y2)
10
16
– 13
16
4 (Z1)
14
16
– 17
16
5 (Z2) CT CT
18
16
– 1D
16
6 CT
Control
CT
Control
1E
16
7 IE IE
1F
16
Unused Unused
The blocks marked ‘DACS’ on these PCI cards are just placeholders for the interrupt source. The
actual registers are not mapped into this area. The PCI224 has 16 multiplexed 12-bit DAC
channels. The PCI234 has 4 multiplexed 16-bit DAC channels. See the PCI224/PCI234 manual for
full details of the registers.
Similarly, the blocks marked ‘EXT’ on these PCI cards are just placeholders for an externally
triggered interrupt source.