User manual

GET TO KNOW YOUR M9500
7
NOTE: Both card slots (1=Standard SIM, 2=Micro SIM) support LTE (4G).
However, if you use two SIM cards at a time, the SIM card in slot 2 is
limited to UMTS/GSM (3G/2G).
• You have the option to insert a micro SD card (max. 32 GB) to increase
the storage capacity. Slide the memory card, with the golden contacts
facing down, into the slot until it stops.
• Insert the battery. In doing so, the battery’s contacts will be on the left and
point up. Press lightly on the bottom end of the battery until it snaps into
place (as shown above).
• Place the back cover back onto the phone and press firmly all around the
edges until it snaps into place.
1.4 Charging the battery
• Ensure that the battery is correctly installed before charging. Do not
remove the battery while the phone is charging. The phone could be
damaged as a result.
• When first starting your phone charge the battery for at least 4 hours.
Some batteries only reach their full capacity after multiple complete
charging/discharging cycles.
• Insert the small plug of the charger into the mini USB charging socket (22
in the figure), ensuring the plug is inserted the correct way around. Do
not use excessive force when inserting the plug.
• Connect the charger. For safety reasons use only the charger delivered
with phone.
1.5 Battery status
The current battery charge status is indicated in the display.
When the battery charge is low, a corresponding warning message appears
in the display. Charge the battery.
When the battery charge drops below the minimum status, the phone
switches off automatically.