User manual

Methods of Entering Data
28
Entering text
Multitap
In order to enter text in Multitap mode, press the
button labelled with the corresponding letter/
character. If the first character of the group is
required, press the button once. If the second
character is required, press it twice, and so on.
To enter two characters assigned to the
same button, press the button the respective
number of times to enter the first character.
Then wait for approx. 2 seconds and enter
the second letter.
Multitap upper case
Multitap lower case
Numbers
To switch between the input modes, press
the  button.
Punctuation and special characters
To access Editing mode, press the  button.
Punctuation marks and special characters are
displayed. Use the  /  buttons to select the
required character and insert it by pressing the
Ok
softkey. To enter a space, press  button.
Service−Hotline: Tel. [phone]