Mobile Phone Operating Instructions PowerTel M5000
HAC Hearing Aid Compatible to M3 / T3 Rating The M5000 Phone has a built in Induction Coil and is hearing aid compatible. To ensure optimum benefit, users with hearing aids may wish to select the T setting on their hearing aids.
1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Contents Safety Information . . . . . . . . . . . . . . 4 Preparing the Telephone . . . . . . . . . 8 Key Functions − Overview . . . . . . . . 16 Preliminary Information . . . . . . . . . . 21 Methods of Entering Data . . . . . . . . . 27 Telephoning . . . . . . . . . . . . . . . . . . 29 Emergency Call Function . . . . . . . . . 34 Emergency Call Function, Examples . 37 Starting/Ending the Emergency Call Function . . . . . . . 41 Phone Book . . . .
Safety Information 1 Safety Information Please read this operating instruction manual thoroughly. Risk of suffocation! Keep packaging materials and protective foils out of reach of children. Intended use This telephone is designed for use when connected to a mobile phone network. Any other use is considered unintended use. Unauthorised modification or reconstruction is not permitted. Under no circumstances open the device or complete any repair work yourself.
Safety Information General information Prevent exposure to smoke, dust, vibration, chemicals, moisture, heat and direct sunlight. The phone is not waterproof; therefore, keep it dry. Only use original accessories and batteries. Never attempt to connect other products. If you want to connect the phone to another device, read the manual supplied with that device with regard to any detailed safety information. Never attempt to connect incompatible products.
Safety Information operating the phone. It is essential to observe the applicable laws and national regulations. Always maintain a distance of at least 15 cm to implanted heart pacemakers to prevent any possible interference. If you have had a pacemaker implanted, do not carry the phone in a breast pocket when switched on. Always hold the phone to the ear furthest away from the pacemaker during calls. Switch the phone off immediately if you notice or suspect any adverse effects.
Safety Information Rechargeable batteries Attention: Never throw batteries into a fire. Only use batteries of the same type. Disposal In order to dispose of your device, take it to a collection point provided by your local public waste authorities (e.g. recycling centre).
Preparing the Telephone 2 Preparing the Telephone Safety information Attention: It is essential to read the Safety Information in Chapter 1 before starting up. Checking the package contents 2 The package contains: 1 mobile phone 1 desktop charging unit 1 Li−ion battery 1 power adapter plug 1 headset 1 operating manual Please note that the phone is delivered with a protection film on the lens area that should be removed before use.
Preparing the Telephone PIN 3 & PIN2 codes The PIN (Personal Identity Number) and PIN2 codes are 4 to 8−digit numbers. The PIN and PIN2 codes are given to you, together with the SIM card, by your network provider. PUK & PUK2 codes 4 The PUK (Personal Unblocking Key) and PUK2 codes are 4 to 8−digit numbers. These are only necessary if you enter the PIN code for the SIM card incorrectly three times in succession and the SIM card is blocked.
Preparing the Telephone Installing the SIM card Risk of swallowing small objects! The SIM card can be removed. Small children can swallow them. The emergency call number 112 can still be dialled even if there is no SIM card installed. The number is automatically dialled if the emergency call switch is activated! Switch the phone off. Pay attention that the SIM card is not bent or scratched. Prevent any contact with water, dirt or electrical charges.
Preparing the Telephone Slide the SIM card with the golden contacts facing down in the moulded SIM card holder. Insert the battery. The golden contacts on the battery must face towards the top left. Press lightly on the bottom end on the battery until it snaps into place. Replace the battery compartment cover back on the phone. Slider the battery compartment cover upwards until it snaps in to place. Take care to align the plastic lugs. Service−Hotline: Tel.
Preparing the Telephone Charging the battery Before starting to charge the battery, check that it has been installed properly. Do not remove the battery while it is being charged. This could damage the phone. When charging the battery for the first time, it should be charged for at least 4 hours. Some batteries only reach their full capacity after several complete charge/discharge cycles.
Preparing the Telephone Charging 6 via the desktop charging unit Plug the connector on the adapter cable in the mini USB port on the charging unit. Insert the phone in the charging unit to charge it. The current battery charge status is7 indicated in the display as follows: Full Half empty Low Empty It may take a few seconds before the phone indicates the charging process. You can use the phone during the charging process. You can also charge the phone via a PC.
Preparing the Telephone Battery status warning When the battery charge is low, a corresponding warning message appears in the display. Charge the battery. In cases where the battery charge is extremely low, it is possible that the back−lighting no longer works and certain functions are no longer available. Charge the battery. When the battery charge drops below the minimum status, the phone switches off automatically.
Preparing the Telephone Setting the display language Select the language required. Refer to Menu Structure; Page 81. The default out of box language is English − therefore other languages are available such as French / German etc. Setting the time and date Set the time and date. Refer to Menu Structure; Page 77. Service−Hotline: Tel.
Service−Hotline: Tel.
Key Functions − Overview 1 Earpiece 2 One−touch dialling buttons / Softkeys 3 On/Off button / End Call key 4 Scroll up/down button 5 Microphone 6 Keypad 7 Call button 8 LED 9 Loudspeaker for handsfree mode 10 Emergency call switch 11 Battery compartment cover 12 Mini USB port with cover 13 Charge contacts 14 Volume control 15 Headset socket 16 Attachment eye for strap The buttons in this operating manual are subsequently depicted with a uniform contour.
Key Functions − Overview 1 Earpiece 2 3 18 The voice of the caller can be heard here when no headset is being worn or the handsfree equipment has not been installed, activated and the device set to Handsfree mode. One−touch dialling buttons / Softkeys A phone number can be assigned to each one−touch dialling button and then dialled directly by pressing and holding the respective button. are also softkeys. The softkeys are assigned different functions in the various menus.
Key Functions − Overview 4 Scroll up/down buttons Navigate in the menus Open the menu Open the phone book 5 Microphone Is activated during a call 6 − Keypad Enter phone numbers and names or write a text. 7 Call button Take a call or dial a number. Open the call list. 8 LED Indicates the phone operating status. 9 Loudspeaker You can hear the caller’s voice from here when the phone is in Handsfree mode. The outgoing alert message is played back loud via this loudspeaker.
Key Functions − Overview 13 Charging contacts The phone is charged via these contacts when in the charging unit. 14 Volume control Regulates the volume of the caller. 15 Headset socket Connect a headset. The earpiece, loudspeaker and microphone are deactivated. You can only hear and speak via the headset. Only use the headset supplied with this phone. There is no guarantee that headsets from other manufacturers will work properly. Damage to the headset or mobile phone cannot be ruled out.
Preliminary Information Buttons with special functions Mode Standby Incoming call Hold Hold Activate/ Activate the key Deactivate the lock No Alert" call setting Activate the No Alert" call setting for this call only Hold A connection is established to your mailbox and you can play messages recorded; Page 57. 4 Preliminary Information This chapter provides basic information on using the operating instruction manual and the telephone.
Preliminary Information Hold Option e.g. Ok Press and hold down the button depicted Enter numbers or letters Mobile phone rings Remove phone from the charging unit Place phone in the charging unit Represents text in the display Indicates icons in the display Press the softkey; Page 24 Icons and texts in the handset display Icon Description Displays the battery capacity. Pumping action indicates that the battery is being charged.
Preliminary Information A roaming1 call is in progress A call is currently being made There are new calls in the call list; Page 49 A new SMS2 message has been received; Page 51 The microphone is deactivated (muted); Page 31 No call alert / silent is activated Ringing tone only is activated Vibration alert only is activated Vibration alert is activated first, then ringing tone Vibration alert and ringing tone are activated 1 Roaming calls: Outgoing or incoming international calls subject to special
Preliminary Information Standby mode 8 All descriptions in this operating manual assume that the mobile phone is in Standby mode. The system switches to Standby mode by pressing the button, several times if necessary. It may be necessary to deactivate the key lock function. Energy−save mode When the phone has been in Standby mode for some time, it automatically switches to energy−save mode. The display no longer lights up. Press any button to reactivate Standby mode.
Preliminary Information Button In Standby mode − Open the main menu − Initiate release of the key lock function In a menu − Various functions − Various functions Navigating in the menu 10 All the functions can be accessed via the various menus. Refer to Menu Structure, Page 73, for information on how to access each respective function.
Preliminary Information Creating phone book entries − example 11 The way in which to navigate through the menus and define settings is explained by means of the example Creating phone book entries. Proceed as in this example for all the settings.
Methods of Entering Data / Edit Select another menu to edit and confirm it Enter any further information regarding this name according to the procedure described. When all the necessary information has been entered, Done Ok Conclude the phone book entry Save? Yes or No Save or reject the entries 5 Methods of Entering Data 12 The keypad is also labelled with letters for the entry of text. The phone provides various methods by which text can be entered.
Methods of Entering Data Entering text Multitap In order to enter text in Multitap mode, press the button labelled with the corresponding letter/ character. If the first character of the group is required, press the button once. If the second character is required, press it twice, and so on. To enter two characters assigned to the same button, press the button the respective number of times to enter the first character. Then wait for approx. 2 seconds and enter the second letter.
Telephoning 6 Telephoning Taking a call Take the call { } Rejecting a call { } Reject the call Ending a call End the call Making a call Clear Enter the phone number Delete the last digit if incorrect Dial the phone number Call list Your mobile phone stores the last numbers dialled (redialling), calls received and missed calls in a call list.
Telephoning If you have assigned several phone numbers to the entry, select the number required. / Select the relevant number Dial the number Quick dialling 13 You must have already assigned phone numbers to the one−touch buttons; Page 64. 3 sec. , or Press the one−touch dialling button Setting the receiver volume The volume can be adjusted during a call. or Select the required volume Talk time display The duration of a call is displayed during a call in hours, minutes and seconds.
Telephoning Muting the microphone in the handset 15 The microphone in the handset can be activated and deactivated during a telephone conversation. Option Open the menu / Mute On Off Deactivate the microphone (muting function activated) Activate the microphone Key lock 16 The key lock is intended to prevent functions being triggered unintentionally. 3 sec. Activate the key lock function Calls can still be taken in the normal way even when the key lock function is activated.
Telephoning The ringing tone is automatically activated for the next incoming call. Options during a call Option Open the Option" menu This menu provides access to functions which can be executed during a call: Hold / Hold Ok Put the current call on hold When a call is put on hold, the menu option changes to Retrieve".
Telephoning New call / New Call Ok Select the function and activate it Enter the phone number and dial it The first call is put on hold. Phone book / Phonebook SMS (text messages) / SMS Ok Open the phone book and use it Ok Open the menu and write/edit an SMS text. DTMF tones / DTMF On Activate the DTMF tones Off Deactivate the DTMF tones Service−Hotline: Tel.
Emergency Call Function 7 Emergency Call Function This mobile phone is equipped with a convenient emergency call function. Up to 5 phone numbers can be entered for emergency calls. When the emergency call function is activated, the phone automatically switches to handsfree", an acoustic alarm is issued and information can appear in the display. If no SIM card is installed and the emergency call switch is switched on, the emergency call number 112 is automatically dialled.
Emergency Call Function / From Phonebook Ok Open the phone book and select an entry The following functions can also be used: View View the entry Clear Delete the entry Sending an emergency call You define whether an emergency call is only sent to the number entered in Help No.1" or to all the emergency numbers entered.
Emergency Call Function Setting the duration of an emergency call You set the length of time an emergency call should attempt to contact an emergency number. When the set time has expired, the next number is dialled. Menu Open the main menu / Reporting Setting Ok Open the menu / Help call duration Ok Open the menu / Off or 1 min. to 5 min. Ok Select the setting required Entering an SOS message You can enter a text message which appears in the display when you activate an emergency call.
Emergency Call Function, Examples 8 Emergency Call Function, Examples The emergency call function is explained here using two realistic examples. If no SIM card is installed and the emergency call switch is switched on, the emergency call number 112 is automatically dialled. Emergency calls to an emergency call center The number of the emergency call center must be stored in the phone book. It may be necessary for you to register with an emergency call center.
Emergency Call Function, Examples / Ok Select emergency call center and confirm it Back / Reach Setting Ok Open the menu / Reach One Only Ok Select the setting and store it Back / Help call duration Ok Open the menu Ok Select the setting and store it / Off In the case of an emergency call: The mobile phone dials the number of the emergency call center and switches to handsfree mode. Make the call.
Emergency Call Function, Examples / Reporting Setting Ok Open the menu / Set Help Numbers Ok Open the menu / Help No.1 Ok Select memory location 1 / From Phonebook Ok Open the phone book / Ok Select an entry and confirm it Back / Help No.2 Ok Select memory location 2 etc. / From Phonebook Ok Open the phone book / Ok Select further entries and confirm them After max. 5 emergency numbers have been dialled Back Ok / Reach Setting Open the menu Service−Hotline: Tel.
Emergency Call Function, Examples / Reach All Ok Select the setting and store it Back / Help call duration Ok Open the menu Ok Select the setting and store it / Off In the case of an emergency call: The mobile phone dials the 1st emergency call number and switches to handsfree mode. When a connection is made, speak to the person answering. If the phone number is engaged" or an answering machine replies, the mobile phone automatically dials the next emergency call number (after approx.
Starting/Ending the Emergency Call Function 9 Starting/Ending the Emergency Call Function Starting the emergency call Slide the emergency call switch upwards. An acoustic signal is issued when the corresponding function is activated. The mobile phone dials the assigned number and switches to handsfree mode. Complete the call. Depending on the settings selected, the number is redialled or the next number is dialled.
Phone Book 10 Phone Book 18 Up to 500 entries (names with several related phone numbers) can be stored in the phone book. Always enter the area code with all the phone numbers. When the memory capacity is used up, the corresponding message appears when an attempt is made to store another entry. Before new entries can be stored, old entries must be deleted. The phone book entries are arranged alphabetically. To skip directly to a required phone book entry, press the corresponding first letter.
Phone Book Clear / Delete Move the cursor, to scroll Creating phone book entries 19 20 Menu Open the main menu / Phonebook Ok Select Phonebook" and confirm it / Add New Ok Select the submenu and confirm it / To SIM or To Phone Ok Select the memory location and confirm it Edit Ok Open Edit mode, enter the name and confirm it / Phone Number Select the next menu Edit Ok Open Edit mode, enter the number and confirm it Ok / Edit / Select another menu to edit and confirm it Complete
Phone Book all the necessary information has been entered: Done Conclude the phone book entry Save? Yes or No Save or reject the entries Saving in Standby mode Save Enter the phone number Open the menu / To SIM or To Phone Ok Select the memory location and confirm it Edit Ok Open Edit mode, enter the name and confirm it Edit / Select another menu to edit and confirm it Complete any further information regarding this name according to the procedure described.
Phone Book Modifying, editing, deleting phone book entries 21 Menu Open the main menu / Phonebook Ok Select Phonebook" and confirm it / Search Ok Select the submenu and confirm it Search for the required entry as described at the beginning of this chapter.
Phone Book Editing or deleting all entries Menu Open the main menu / Phonebook Ok Select Phonebook" and confirm it The following functions can also be used: Delete All Delete all the entries (SIM or phone) Copy All Copy all the entries (SIM or phone) Execute the functions and then confirm them. Groups You can assign the entries to various groups. Groups can be displayed or hidden in order to have a better overview of the phone book. The groups can be allocated different ringing melodies.
Phone Book / Family Ok Select the group and confirm it / Member List Ok Select Member List and confirm it If there are no entries in the Member List, only the Add menu option is available. Add / Select an entry from the phone book and add it If there are entries available in the Member List, press the Option softkey. The following options Add or Clear are then available.
Phone Book Edit To edit the group name or / Associate Sound Change To select a different ringing tone Settings Menu Open the main menu / Phonebook Ok Select "Phonebook" and confirm it / Settings Ok Select menu and confirm The following functions are available Memory Status The status of the SIM and phone is displayed Fields Select the fields in the phone book to be displayed My vCard in order to Send My Card edit them or Send vCard to send them 48 Service−Hotline: Tel.
Call List 11 Call List 22 The mobile phone is equipped with a call list. Your mobile phone stores the last phone numbers dialled, taken and received but missed. If one of the phone numbers received matches an entry in the phone book, the associated name appears. The following icons appear to indicate numbers dialled, calls received, missed calls.
Call List Save Save the entry (SIM or phone) Call Dial the entry Edit Edit the entry Delete All Delete the calls list Execute the functions and then confirm them. 50 Service−Hotline: Tel.
SMS − Text Messages 12 SMS − Text Messages It is possible that not all functions described are supported by every provider. Therefore, please contact your local mobile phone provider for details. SMS settings SMS messages are distributed via a Service Centre. If you want to send and receive SMS text messages, you must program a service centre number in your mobile phone. Normally, this has already been set up by your service provider.
SMS − Text Messages SMS service center Navigate to the Profile Setting" menu. / Profile Setting Ok Select the menu and confirm it Edit / Number Select the menu and confirm it Ok Enter or edit the MSC number and save the settings Validity You can use this feature to define how long an attempt should be made to deliver a message which you have sent. Navigate to the Profile Setting" menu.
SMS − Text Messages Settings Delivery report Select Delivery Report − On" to receive the corresponding delivery confirmation report that a message sent has been delivered. Reply path Select Reply Path − On" to send the reply path of your provider with an SMS message. Contact your provider for further details. Navigate to the Profile Setting" menu.
SMS − Text Messages / Messages Ok Select the menu and confirm it / Write Message Ok Select the menu and confirm it Write the text. Information on ways of entering text; Page 27. Send Open the menu The following functions are available Send Only Ok or Search Enter the number or select from the phone book Save and Send Ok Enter the number or select or Search from the phone book. The SMS text is saved in the Outbox" folder. Save Ok The SMS text is saved in the Outbox" folder.
SMS − Text Messages Send By Group Ok The SMS text is sent to all the members of a group. Execute the functions and then confirm them. SMS text messages sent and received Texts received are indicated by a ringing tone which you have set. New Message!" appears in the display. Press the Read" softkey to display the message. SMS texts received are stored in the Inbox" folder. SMS texts sent are saved in the Outbox" folder as are the drafts.
SMS − Text Messages The following functions are available: Reply Reply to the number from which the text was sent Forward Forward the text to a different number Send Send the SMS text Edit Edit the SMS text Clear Delete the SMS text Copy to SIM / Copy to Phone Copy the SMS text Move to SIM / Move to Phone Move the SMS text Delete All Delete all the SMS texts Copy All Copy all the SMS texts (SIM or phone) Move All Move all the SMS texts (SIM or phone) Use Number Use the number from which the text was sent Ex
Voice Mail 13 Voice Mail 24 It is possible that not all functions described are supported by every provider. Therefore, please contact your local mobile phone provider for details. They may concern services which are subject to charges. In order to use the Voice Mail"1 feature, the relevant phone number must be programmed in your mobile phone. Normally, this has already been set up by your service provider.
Voice Mail If a number is already available, it appears instead of Empty". Ok Enter or edit the Voice Mail number and save it The following functions are available in the Voice Mail" menu. Clear Ok The Voice Mail number is deleted Connect to Voice Mail Ok The Voice Mail number is dialled Execute the functions and then confirm them.
Services 14 Services It is possible that not all functions described are supported by every provider. Therefore, please contact your local mobile phone provider for details. They may concern services which are subject to charges. Navigating to the Call Setting" menu. Menu Open the main menu / Phone Setting Ok Select the menu and confirm it / Call Setting Ok Select the menu and confirm it Forwarding calls The following functions enable incoming calls to be transferred to other phone numbers.
Services Select the setting for which calls should be redirected All Voice Calls If Unreachable If No Answer If Busy and then select Activate Ok or Search Ok Enter the number or select from the phone book. The call forwarding function is then active. Deactivate Ok The corresponding call transfer is deactivated Check Status Ok Display the current setting Call barring The following function is used to restrict calls which can be received and made. Navigate to the Call Setting" menu.
Services Changing the network password This service must be requested from the telephone network provider. The provider then makes the corresponding numeric code available. Navigate to the Call Setting" menu. / Call Barring Ok Select the menu and confirm it / Change Password Ok Select the menu and confirm it Refer to Menu Structure; Page 86 Call waiting This function issues an acoustic signal to inform you that another call has been received while the current call is in progress.
Services SIM Toolkit Your mobile phone supports the SIM Toolkit1. You receive information on: using STK, charge rates, data and offers from your SIM card service provider. Menu Open the main menu / SIM Toolkit Ok Select the menu and confirm it Execute the functions and then confirm them. Broadcast messages You mobile phone supports receiving broadcast2 messages. You receive information on: broadcast messages, charge rates, data and offers is from your SIM card service provider.
Services / Message Settings Ok Select the menu and confirm it / Broadcast Message Ok Select the menu and confirm it Refer to Menu Structure; Page 74. Service−Hotline: Tel.
Settings 15 Settings One−touch dialling buttons 25 It is possible to assign phone numbers to the one−touch dialling buttons , or which are then dialled directly by pressing and holding the corresponding button; Page 30. Each number you want to define as a one−touch dialling number must be stored in the phone book.
Settings Clock and alarm This menu option can be used to set and change the date, time and alarms. Open the menu: Menu Open the main menu / Clock & Alarm Ok Select the menu and confirm it Refer to Menu Structure; Page 77. Calender This menu option opens the current calendar sheet. You can select other days and manage entries in the appointments list. Use the / buttons to navigate in the Calender display.
Settings Flashing keypad Use this menu to select whether the keypad lighting should flash in the event of incoming calls. Menu Open the main menu / Phone Setting Ok Select the menu and confirm it / Call Setting Ok Select the menu and confirm it / Key LED flash Change Select the menu and confirm it / On or Off Ok Select the setting and confirm it Network setting Network selection: This menu can be used to select mobile telecommunication networks other than your own mobile network provider.
Settings It is possible that not all functions described are supported by every provider. Therefore, please contact your local mobile phone provider for details. They may concern services which are subject to charges. Menu Open the main menu / Phone Setting Ok Select the menu and confirm it / Network Setting Ok Select the menu and confirm it Network Selection or Preferred Networks Refer to Menu Structure; Page 86. Navigation buttons You can assign various menu options to the digit keys 2 to 9.
Settings / 4−key Edit Select the required button and confirm it / Calendar Ok Select the required menu and confirm it Refer to Menu Structure; Page 87. In the example above, the calender is opened when the button is pressed for longer than 3 seconds when in Standby mode. Security settings This menu is used to define which functions on the phone or SIM card should be protected by a password/PIN. The PIN and password can be changed. PIN and PIN2 are supplied together with the SIM card.
Settings The default setting for the password is 1122. If this lock is active, you can only open the main menu by entering the password. SIM Lock The password is supplied together with the SIM card. If you deactivate the SIM lock, you need not enter the PIN after switching the mobile phone on. It is recommended to leave the SIM lock on to prevent unauthorized persons from using the mobile phone. Phone Lock The default setting for the password is 1122.
Settings Display settings Use this menu to adapt the phone display to your own personal needs. Navigate to the Phone Setting" menu.
Settings Sound settings Use this menu to adapt the phone’s ringing tones to your own personal needs. Navigate to the Phone Setting" menu.
Settings Navigate to the Phone Setting" menu. / Auto KeyLock Ok Select the menu and confirm it Select None Ok The automatic function is deactivated or (e.g.) 5 min. Ok the key lock is automatically activated after the selected value Default settings The mobile phone is reset to its default (factory) settings. Default settings; Page 94. Navigate to the Phone Setting" menu. / Restore Factory Settings Ok Select the menu and confirm it Refer to Menu Structure; Page 88.
Menu Structure 16 Menu Structure Main menu Open the main menu by pressing the = Menu button. Then press the / buttons to select a menu option and confirm the selection with the Ok button. For further information on the menu and operation, Chapter 4. Messages Write Message Send Only Save and Send Save Send To Many Send By Group Inbox Outbox Service−Hotline: Tel.
Menu Structure 26 Message Settings Voice Mail Empty Clear Connect to Voice Mail Broadcast Message Receive Mode Off On Languages Languages All Languages GERMAN ENGLISH Channels Select 74 Service−Hotline: Tel.
Menu Structure 27 Add Title Number Edit Clear Profile Setting Profile Setting Number Validity Common Setting Delivery Report On Off Reply Path On Off Memory Status Service−Hotline: Tel.
Menu Structure 28 Set M1/M2/M3 M1 Call Number View From Phonebook Clear M2 Call Number View From Phonebook Clear M3 Call Number View From Phonebook Clear 76 Service−Hotline: Tel.
Menu Structure 29 Clock & Alarm Time & Date Set Home City Set Time/Date Set Format (12/24−hour clock) (various date formats) Alarm Tone Vol. (select 1, 2 or 3) Off/On (set the alarm time) Once/Every day/Weekly Show Time & Date Off/On Service−Hotline: Tel.
Menu Structure 30 Phonebook Search Add New To SIM/To Phone Name Phone Number Home Number Company Name Email Address Office Number Fax Number Associate Sound Caller Group Delete All To SIM/To Phone Copy All To SIM/To Phone 78 Service−Hotline: Tel.
Menu Structure 31 Caller Group Friends/Family/VIP/Business/Others Name/Associate Sound/Member List Settings Memory Status Fields Home Number Company Name Email Address Office Number Fax Number Associate Sound Caller Group My vCard Send My Card Send vCard Service−Hotline: Tel.
Menu Structure 32 Reporting Setting Set Help Numbers Help No.1 − 5 View/From Phonebook/Clear Reach Setting Reach All/Reach One Only Help call duration Off/1−5 min. Predefine Help Message 33 Calendar View Tasks Jump To Date 80 Service−Hotline: Tel.
Menu Structure 34 Phone Setting Display Setting Language GERMAN/ENGLISH/FRENCH Greeting Text Off/On Screen Saver Settings Off/5 sec.−1 min. Select (various images) Contrast 1−8 LCD Backlight Brightness ON Duration 5 sec.−1 min. Service−Hotline: Tel.
Menu Structure 35 Font Size Small/Large File Manager Open Audio/Images/Inbox Open/Create Folder/ Rename/Clear/ Sort Sound Setting Set Sound Ring Tone Vol. 1−15 Alarm Tone 1−15 Message Tone Silent/1−5 Key Tone Vol. Silent/Click/Tone 82 Service−Hotline: Tel.
Menu Structure 36 Set Volume Ring Tone Vol. Key Tone Vol. Message Tone Vol. Alarm Tone Vol. System Tone Vol. Alert Type Ring Only Vibrate Only Vibrate and Ring Vibrate Then Ring No Alert Help Tone Off/On Call Setting Caller ID Set By Network/No/Yes Service−Hotline: Tel.
Menu Structure 37 Call Waiting Activate/Deactivate/Check Status Call Divert All Voice Calls Activate/Deactivate/Check Status If Unreachable Activate/Deactivate/Check Status If No Answer Activate/Deactivate/Check Status If Busy Activate/Deactivate/Check Status Cancel All Divert Call Barring Outgoing Calls All Calls Activate/Deactivate/ Check Status 84 Service−Hotline: Tel.
Menu Structure 38 International Calls Activate/Deactivate/ Check Status International Except Home Activate/Deactivate/ Check Status Incoming Calls All Voice Calls Activate/Deactivate/ Check Status When Roaming Activate/Deactivate/ Check Status Cancel All Bar Pwd: Service−Hotline: Tel.
Menu Structure 39 Change Password Old Pwd: New Pwd: Enter Again: Auto Redial Off/On Key LED flash Off/On Network Setting Network Selection New Search Select Network Selection Mode Automatic/Manual Preferred Networks (select network) Add From List 86 Service−Hotline: Tel.
Menu Structure 40 Create New MCC/MNC Change Priority Change Priority Clear Set Fast key 2−9 2−key−9 (select function) Security Setting Main Menu Lock Off/On Phone Lock SIM Lock Off/On PIN Phone Lock Off/On Phone Lock Service−Hotline: Tel.
Menu Structure 41 Change Password PIN Old PIN: New PIN: Enter Again: PIN2 Old PIN2: New PIN2: Enter Again: Phone Lock Old Pwd: New Pwd: Enter Again: Auto KeyLock None/5 sec.−5 min. Restore Factory Settings Bar Pwd: 88 Service−Hotline: Tel.
In Case of Problems 42 SIM Toolkit (provider−dependent menu) 17 In Case of Problems Service hotline Should problems arise with the telephone, please refer to the following information first. In the event of technical problems, please contact out service hotline under tel. 0844 800 6503. In the case of claims under the terms of guarantee, contact your sales outlet. There is a 2 year period of guarantee. Problems and solutions Problems The mobile phone cannot be switched on.
In Case of Problems No signal quality is displayed. Keypad does not function or only functions very slowly. A message appears in the display for some functions, indicating execution/use is not possible. 90 − No network connection. The mobile phone is in a location where there is no network service. Move to a different location or contact your service provider. − The operating speed of the display is reduced in the case of low temperatures. This is normal. Use the phone in a warmer location.
In Case of Problems No display during the charging process. No connection to the mobile telecommunication network. The Insert SIM" message appears in the display. − The battery status is very low or the mobile phone is being operated outside the recommended temperature range (0º − 45 ºC). Wait a few minutes or move the phone to a warmer location. Start the charging process again. − Contact your service provider. − Ensure that the SIM card has been installed correctly.
In Case of Problems The battery cannot be charged or is empty within a short time. 92 − Battery is defect. − Place the phone correctly in the charging unit or connect the charging unit properly. Clean the contact surfaces on the mobile phone and charging unit with a soft, dry cloth. − Charge the mobile for 4 hours. Service−Hotline: Tel.
Technical Facts 18 Technical Facts Technical data Feature Standard Dimensions Weight Power supply Battery Standby time Max. talk time Display SMS Value GSM1 900, 1800 MHz Dualband 50 x 128 x 16.5 mm (W x H x D) < 100 g incl. battery Input: 100−240 V, 50−60 Hz, 0.2 A Output: Mini−USB 5 V, 800 mA Model: BP−75LI 3.7 V, 750 mAh Up to 170 h Up to 120 min 1.77" monochrome, Resolution: 128 x 128 Standard SMS 1 GSM = Standard for mobile phones. Service−Hotline: Tel.
Technical Facts Permissible ambient temperature Permissible relative humidity 0°C to 40°C 30% to 75% All Rights Reserved! Default settings 43 The default settings can be restored via the menu. Refer to Page 88 for the sequence of menu option selections. M1, M2, M3 Empty Set Home City London Time & Date−Set Format 24 Hr h DD/MM/YY Show Time & Date On Fields Name Phone Number Home Number Company Name Email Address Office Number 94 Service−Hotline: Tel.
Technical Facts Message Settings Language Screen Saver Set Sound Set Volume Alert Type Help Tone Set Fast key 2−9 Delivery Report − Off Reply Path − Off Validity − 1 day ENGLISH Off Ring Tone Vol. − 10 Alarm Tone − 4 Message Tone − 1 Key Tone Vol. − Tone Ring Tone Vol. − 5 Alarm Tone − 5 Message Tone − 5 Key Tone Vol. − 5 System Tone Vol. − 5 Ring Only On 2 − Language 3 − Time & Date 4 − Set Alarm 5 − Call Setting 6 − Set M1/M2/M3 Service−Hotline: Tel.
Technical Facts Main Menu Lock Auto KeyLock Reach Setting Help call duration 7 − Inbox 8 − Calendar 9 − Font Size Off Off Reach All Off Declaration of Conformity This device fulfils the requirements stipulated in the EU directive: 1999/5/EU directive on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity. Conformity with the above mentioned directive is confirmed by the CE symbol on the device.
SAR Information 19 SAR Information Information on radio frequency emissions and specific absorption rates (SAR = Specific Absorption Rate). All the applicable safety standards related to radio frequency emissions were implemented during the development of this mobile phone. The limit values are based on scientific directives and contain a safety margin in order to guarantee the safety of all persons regardless of age and state of health.
Maintenance / Guarantee 20 Maintenance / Guarantee Maintenance Clean the housing surfaces with a soft, fluff−free cloth. Do not use any cleaning agents or solvents. Guarantee AMPLICOM equipment is produced and tested according to the latest production methods. The implementation of carefully chosen materials and highly developed technologies ensure trouble−free functioning and a long service life.
Maintenance / Guarantee influences are excluded from the terms of guarantee. In the case of complaints, we reserve the right to repair defect parts, replace them or replace the entire device. Replaced parts or devices become our property. Rights to compensation in the case of damage are excluded where there is no evidence of intent or gross negligence by the manufacturer.
Index 21 Index A D Alarm, 65 Audio settings, 71 Automatic key lock, 71 Automatic redialling, 61 B Barcode labels, 8 Battery charge status, 12 Battery status warning, 14 Broadcast messages, 62 C Calender, 65 Call barring, 60 Call list, 29, 49 Call settings, 59, 66 Call waiting, 61 Calling back, 29 Calling back missed calls, 29 Charging, 12 Clock, 65 Creating, 26 Creating phone book entries, 43 100 Date, 15 Deactivating the ringing melody, 31 Declaration of Conformity, 96 Default settings, 72, 94 Deleti
Index E K Editing, 45 Emergency call function, 34 Emergency call function, examples, 37 Emergency call to several numbers, 38 Emergency calls to an emergency call center, 37 Ending a call, 29 Ending the emergency call, 41 Energy−save mode, 24 Entering an SOS message, 36 Entering names, 42 Entering text, 42 Entering/Deleting emergency call numbers, 34 Key Functions − Overview, 16 Key lock, 31 L Large Font Size, 70 M Main menu, 73 Maintenance , 98 Making a call, 29 Menu structure, 73 Methods of entering
Index P Package contents, 8 Passwords, 8 Phone book, 29, 33, 42 Phone book entries, 26 Phone settings, 69 PIN/PIN2 code, 9 Problems, 89 Problems and solutions, 89 PUK/PUK2 code, 9 Punctuation and special characters, 28 Q Quickdial, 30 R T Receiver volume, 30 Redialling, 29 Reject, 29 Rejecting a call, 29 S Safety information, 4 SAR Information, 97 Saving, 26 Security settings, 68 Sending an emergency call, 35 Service−Hotline, 89 102 Services, 59, 64 Setting the duration of an emergency call, 36 SIM c
Important Notes on the Guarantee The period of guarantee for the AMPLICOM product begins on the date of purchase. Rights to claims under the terms of guarantee relate to deficiencies resulting from material or production faults. Rights to claims under the terms of guarantee are annulled following intervention by the purchaser or third parties.
