Operation Manual

10
Helpline UK 0844 800 6503
(See user manual PowerTel 710 Voice for costs and hours of operation)
Connect your charger base
Plug the other power adapter that’s already attached to
your charger base into your mains power wall socket and
switch the power on. You should ensure access to the
power adapter plug is not obstructed by furniture or such.
Registering the handset at a PowerTel base
At the handset:
1. Press and hold for approx 10 seconds until the dis-
play shows Press & Hold Base Page Key.
At the base:
2. Press and hold for at least 10 seconds until the indi-
cator light on the base ickers.
Note: If you are registering a PowerTel 711 Voice to a base
station other than Amplicomms you will need to consult
your base station user manual in order to determine how
Important: make sure any handset you’re registering is
fully charged before you try to register it.
PREPARING THE TELEPHONE