User Guide

• Change the setting using and and press

or simply

press

to keep the current setting.

Flash time - In most situations the ash time of 100 ms should be selected.

In some cases, e. g. when connecting the phone to a PABX, it may be

necessary to switch to 270 or 600 ms. For further information please refer

to the user guide of the PABX.

Special use

Use on a private branch exchange

If your phone’s on an exchange (e.g. you need to dial 9 to get an outside

line), you can transfer calls and use call back by using the

button

(Recall).

You’ll need to check your private exchange manual to nd out which timing

to use for your exchange.

Insert a dialling pause

If you have to dial a number for an outside line and it takes a while to

connect, you can insert a pause so you don’t have to wait to hear the

dialling tone.

To insert a dialling pause, simply enter the number (e.g. 9) usually dial

for an outside line and then press

. You’ll need to check your private

exchange manual to nd out which pause time to use for your exchange.

Using additional services

Your phone should be able to support services such as call waiting and

conference calls. You’ll need to check with your telephone network

provider for further information on these services.

Help and support / Troubleshooting guide

I can’t make phone calls

• Make sure the phone cable is connected properly. If it is, there may

be a fault. Please make sure you’re using the phone cable that came

with your phone.

There is a hissing or crackling noise in the earpiece. / My internet

connection is very slow when I connect the telephone to the line

• If you have a broadband internet connection, ensure that you have

connected the line cable to the telephone line via a DSL lter.