User Guide

16
One-touch dialling / Emergency call
You can use the buttons M1 and M2 as one-touch dialling buttons resp.
as memory buttons for an emergency call. This will be quicker and easier
than dialling with the quick dial feature or the phone book.
Storing telephone numbers to the one-touch memory buttons
• Press
.
• Enter the telephone number and press
.
• Enter the name and press
.
• Press
or , to assign the telephone number to the
respective button.
Note: The phone numbers assigned to the one-touch dialling buttons
cannot be deleted. When storing new numbers, the existing entries are
overwritten.
Calls list
Note: The caller number display function, essential for the calls list, is a
supplementary service offered by telephone network providers. Contact
your network provider for further information.
If this function is available with your telephone line, the number of the
caller and the name, if an entry in the telephone book exists, appears in
the display when the phone rings. If the caller has suppressed
transmission of his phone number or it is otherwise unavailable, a
corresponding message appears in the display. The phone number is not
displayed and, as a result, is not stored in the calls list.
The idle display shows, how many entries are in the calls list and how
many of them are NEW (not yet seen). A total of 32 call numbers can be
stored in the calls list. The ashing red LED indicates new calls in the calls
list. This LED will flash as long as there are still new (not read) calls
in the calls list.
To stop ashing press
repeatedly.
Displaying phone numbers in the calls list
• Press
or and select an entry using and .
Storing numbers from the calls list in the phone book
• Press
or and select an entry using and .