User Guide

11
You will only have to do this when operating your phone on a PABX.
For more information please refer to page 18. Press
C
.
The display shows FLASHTIME ashing.
Use
or to select the ash time (if necessary). In most situations
100 ms (setting on delivery) should be selected. You won’t have to change
anything.
Simply press
C
.
Your telephone is ready to use and shows the idle display
You can change this settings later at any time. For more information
please refer to page 17.
Making and receiving calls
Dialling a telephone number
To start a call you have the following options:
- lift the handset and enter the phone number.
- enter the phone number and lift the handset.
or alternatively
- enter the phone number and press
.
- Handsfree mode will be activated and the phone number will be
dialled in handsfree mode.
• During a call you can see the call time on the display.
Ending a call
For ending a call you can:
- replace the handset. or alternatively
- press
if the call was made in handsfree mode
(the red LED within the handsfree button is on).
Taking a call
Lift the handset or press
.
Activating/deactivating handsfree mode
During a call you are making using the handset.
You can switch to handsfree mode to switch on the loudspeaker by
Press
and then replace the handset.
English