TCL VIBE User Guide
Contents Features..............................................4 Functions.............................................6 Settings...............................................9 Important Safety Instructions This alarm clock is designed to provide an acoustic alarm or alert signal at a set time. Any other use is considered unintended use. Unauthorized modification or reconstructions is not permitted. Do not open the device and attempt any repair work yourself.
FCC FCC Compliance The FCC requires that you will be advised of certain requirements involving the use of this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Features Features • Clock and calendar display • Dual alarm clock and snooze • Indoor temperature • Low battery indicator • Selectable alarm (audio, vibration or both) • Wireless transmission to wrist alert • Amber backlight • Runs on 3 AAA batteries 4 Service Center
Layout Clock Face Layout 1 5 2 3 1 Battery Indicator 2 Time 3 Alarms 4 Alarm Type 5 Temperature 4 1-866-AMPLICOM (267-5426) 5
Functions Button Functions When alarm is beeping or vibrating on wrist, press any button except for “SNOOZE” , and alarm will stop beeping and/or vibrating.
Functions UP ARROW • In clock setting mode, increase the setting value or select 12/24hr format or temperature unit or buzzer volume/frequency high/low; • In alarm setting mode, increase the setting value or select alarm mode(audio alarm/vibration alarm/both/both not) DOWN ARROW • In clock setting mode, decrease the setting value or select 12/24hr format or temperature unit or buzzer volume/frequency high/low;; • In alarm setting mode, decrease the setting value or select al
Functions RESET Reset system, It is inside the battery compartment. Alarm and Snooze Function When the alarm 1/2 viewing display, press and hold ALARM 2s to enter the set mode of alarm time. The sequence is Hour--- Minute ---alarm mode---exit. When press UP or DOWN ARROW to modify the alarm time. Press and hold UP/DOWN ARROW 2s to enter fast set the parameter.
Settings While the unit is beeping, icon or the icon is flash in [1Hz], If alarm mode is in audio alarm mode, the alarm beep format is: 0 → 9s [B] / s 10 → 29s [BB] / s 30 → 90s [BBBB] / s If alarm mode is in vibration alarm mode, it will send RF packet every 0.5 second, The wrist belt will vibrate when it has received the RF packet. While snooze mode, icon or the icon is flash in [1Hz]. Settings Press and hold MODE/ENTER 2s to set the clock at clock viewing screen.
Settings The desired setting will flash with [1 Hz], and press UP or DOWN ARROW to set the conditions of operation. Press and hold UP/DOWN ARROW 2s to fast set these conditions. Press and hold MODE/ENTER 2s to set the buzzer volume and frequency at buzzer volume viewing screen.
Settings Connect-check with Wrist unit Transmitter: If alarm 1 or alarm 2 have been set with vibration, then press and hold DOWN ARROW 2S to send RF connect-check command, (include alarm 1 and alarm 2) Transmitter: RF command will keep transmitting for 90s, press any key except for SNOOZE to end connect-check with wrist unit Transmitter: During connect-check with wrist unit,alarm 1 or alarm 2 icon will flash Wrist unit: During connect-check with wrist unit, wrist unit also must enter connectcheck mode, t
General information Default Settings The display mode is Hour—Minute--Second. Language: English. The clock time is Jan 1,2012 0:00. The alarm time is 0:00 and the alarm is disable. The time format is 24 Hr (DCF) or 12Hr(WWVB). The temperature unit is ˚C (DCF) or ˚F (WWVB). Maintenance and Warranty Maintenance • • 12 Please clean your equipment’s surfaces with a soft, lint-free cloth. Never use cleaning agents or solvents.
Warranty Warranty AMPLICOM equipment is produced and tested according to the latest production methods. The implementation of carefully chosen materials and highly developed technologies ensure trouble free functioning and a long service life. The terms of the warranty do not apply where the cause of the equipment malfunction is the fault of the telephone network operator or any interposed private branch extension system.
Warranty external influence are not covered by the terms of warranty. In the case of complaints, we reserve the right to repair or replace defect parts or provide a replacement device. Replacement parts or devices become our property. Rights to compensation in the case of damage are excluded where there is no evidence of intent or gross negligence by the manufacturer.
Warranty Included in the Box: Clock 3 AAA Batteries Travel Pouch Wrist Band Vibration Unit Charge Cable 1-866-AMPLICOM (267-5426) 15
Questions? Amplicom USA Service Center 3018 Ambrose Avenue Nashville, TN 37207 V/TTY: 1-866-AMPLICOM (267-5426) www.amplicomusa.
