User guide

Helpline 0844 800 6503 (See page 114 for costs and hours of operation)
13
GETTING STARTED
4 Charge your handset
So it can charge fully, place your handset on its base to charge for at least 16
hours (make sure the power socket is switched on!).
Attach the belt clip
There is a belt clip included in the box that you can attach to the back of your
handset if required. Simply turn the handset over and slot the belt clip securely
into the two recesses located on either side of the handset.
Connecting and charging your wrist shaker
1 Position your charger unit
Make sure your charger unit:
• is on a dry, at and stable surface
• isn’t a trip hazard with its power cable
• is at least one metre from other electrical appliances
2 Plug in the charger unit
Plug your charger unit into your power supply. And switch on at the socket.
Important: only use the rechargeable 750mAh NiMH batteries supplied.
Over time if you need to replace the batteries make sure they are of the same
type as those supplied. Never use Alkaline batteries.